- Published on
After a 2 year search, we finally found and purchased a new truck. It was a 6 hour drive away, but over a long weekend, we drove out and back to get it. By the next weekend, our Ram was sold as well. As we pulled out for the trip, our grandson joined us in his recently-acquired conversion van, which needed a few more upgrades to make it more like home.
Truck News
Dave has been researching a change in our truck since shortly after we purchased our Cougar RV. His interest in switching to a 4-wheel drive truck stepped up a notch after our 2-wheel drive Ram was stuck in the mud at a campground in Indiana the next summer. And while we had accepted a longbed truck in 2018 when we were desperate for a truck, we never liked its lack of maneuverability and the space it took up wherever we went.
So, we were serious enough about switching that we ordered not 1 but 2 trucks in December of ‘21. They didn’t arrive until late July of ‘22 when we were 1200 miles away. Not surprisingly, we let those go. Successive attempts to order another truck last fall didn’t go well either. As the market was changing, we decided to start looking for trucks on the lot. Dave also had zeroed in on the 2024 GM trucks which weren’t becoming available until early summer.
Dave has been researching a change in our truck since shortly after we purchased our Cougar RV. His interest in switching to a 4-wheel drive truck stepped up a notch after our 2-wheel drive Ram was stuck in the mud at a campground in Indiana the next summer. And while we had accepted a longbed truck in 2018 when we were desperate for a truck, we never liked its lack of maneuverability and the space it took up wherever we went.
So, we were serious enough about switching that we ordered not 1 but 2 trucks in December of ‘21. They didn’t arrive until late July of ‘22 when we were 1200 miles away. Not surprisingly, we let those go. Successive attempts to order another truck last fall didn’t go well either. As the market was changing, we decided to start looking for trucks on the lot. Dave also had zeroed in on the 2024 GM trucks which weren’t becoming available until early summer.
All summer long, Dave looked at dealers along the east coast, rarely finding a ¾ ton truck on the lot, and few that met our specific criteria even in the ones en route to dealers. So, in September we started calling dealers in Florida to see about ordering one now to be delivered before we left Jacksonville in the spring. It was then that Dave stumbled across a truck that was here in Virginia that met almost all of our criteria: short bed, 4x4, 5th wheel prep, double cab, with the large screen and cameras. But Virginia is a very big state, and we discovered this dealer was about as far west as you could go in the southwest corner of the state near the Kentucky border. Never mind the drive. We talked to the salesperson on Friday morning and were on the road toward Clintwood VA on Saturday. Stopping in Abingdon Va for the weekend, we took some time to sightsee in the area before heading out early Monday morning for the 90 minute drive to Clintwood.
Bracing ourselves for the day-long ordeal at the dealership that we experienced in 2018, we were shocked when we were given a quick review of the costs (no dealer prep or other add-ons), took a test drive and had a short session of signing papers. We were on our way in about 2 hours, which included time to walk to the nearby bank for a cashier's check.
Leaving before noon, we set out in both trucks to head back toward Pocahontas. (Since we had planned to sell our Ram to a friend, we didn't trade the old one in.) We stopped a couple of hours short of the park for the night to break up the trip.
Leaving before noon, we set out in both trucks to head back toward Pocahontas. (Since we had planned to sell our Ram to a friend, we didn't trade the old one in.) We stopped a couple of hours short of the park for the night to break up the trip.
Now that we had the new Chevy, we just had to sell our old 2018 Ram. This transaction had more drama than it should have. We discovered that we had an electronic title in Florida. This would have to be turned into a printed title to complete the sale in Virginia. And the only way to get a printed title was to show up personally at the Florida DMV or to give someone in Florida an original signed Power of Attorney document to request it for us or wait a couple of weeks for the mail to catch up. Pastor Barry agreed to make the trip to the DMV, and we calculated that with next day mail each way, the documents should arrive a couple of days before we needed them.
Not so fast.
The southbound POA document was mailed overnight mail on Friday morning, but didn't arrive in Jacksonville until Tuesday evening. Hmm. . . Isn’t that 4 days? Barry wasted no time and had the title in the mail before 2pm the next day. This time, our “next day” mail arrived 2 days later on Friday. Luckily the buyer had delayed his arrival until Saturday morning, and the local DMV had Saturday hours. Of course, he drove through Ophelia’s fury to pick up the truck, but other than that all went well. And 2 days later, he was on his way in the truck on a long trip to Wisconsin.
It all worked despite the nail-biting about late deliveries.
Not so fast.
The southbound POA document was mailed overnight mail on Friday morning, but didn't arrive in Jacksonville until Tuesday evening. Hmm. . . Isn’t that 4 days? Barry wasted no time and had the title in the mail before 2pm the next day. This time, our “next day” mail arrived 2 days later on Friday. Luckily the buyer had delayed his arrival until Saturday morning, and the local DMV had Saturday hours. Of course, he drove through Ophelia’s fury to pick up the truck, but other than that all went well. And 2 days later, he was on his way in the truck on a long trip to Wisconsin.
It all worked despite the nail-biting about late deliveries.
Fitting out the New Truck
The new Chevy had 4-wheel drive, but that meant it was even taller than our 2-wheel drive Ram. And one of the things not already installed on the truck were running boards. After only a few rides hauling ourselves into the truck, we had some running boards on order. Our grandson Droz was staying with us and provided some helpful extra hands to get them installed. They went on pretty quickly and make the first step up not so challenging.
The new Chevy had 4-wheel drive, but that meant it was even taller than our 2-wheel drive Ram. And one of the things not already installed on the truck were running boards. After only a few rides hauling ourselves into the truck, we had some running boards on order. Our grandson Droz was staying with us and provided some helpful extra hands to get them installed. They went on pretty quickly and make the first step up not so challenging.
One of the challenges of finding the right truck was finding one with enough payload rating to support the pin weight of our fifth wheel when it is loaded. Even with a good payload rating, we are still trying to be conscious of the weight in the truck. So, we took this opportunity to switch our hitch from a Reese to a B&W Companion. The Reese was heavy enough that we would never attempt to remove it from the bed. Also, to take advantage of the “puck” system (pre-drilled holes that accept and lock in a 5th wheel hitch) on the truck, it required a large metal square rail to adapt it. The B&W Companion would connect directly to the puck system and was significantly lighter. With Droz’ help to both remove the old hitch and install the new one, the installation went smoothly.
However, the real test was to hitch up to the RV. The truck bed was higher than the Ram, and the hitch looked like it was sitting higher in the bed than the Reese did. Would we even be able to raise the RV up high enough to hook up? Despite all of our concerns, the RV connected easily and was within a fraction of a degree of being level once connected. Droz was especially happy, since it meant he didn’t have to take the hitch apart to adjust its height.
Cabin Work
While the rain and wind that came with Ophelia made for a rainy day to sell our truck, it was a mixed blessing. That same weather caused us to cancel a planned workday that was scheduled for the same time that we were to meet Jim. However, the next week we were joined by one of our local volunteers, Kevin, staying in the park for the week. He helped us tie up some loose ends from last year’s project by staining a deck in the 3rd Branch cabin group that had been built during the final days of last year's project, and painting the back of another building that had repaired in the spring, but needed some touch up.
While the rain and wind that came with Ophelia made for a rainy day to sell our truck, it was a mixed blessing. That same weather caused us to cancel a planned workday that was scheduled for the same time that we were to meet Jim. However, the next week we were joined by one of our local volunteers, Kevin, staying in the park for the week. He helped us tie up some loose ends from last year’s project by staining a deck in the 3rd Branch cabin group that had been built during the final days of last year's project, and painting the back of another building that had repaired in the spring, but needed some touch up.
And we had another workday scheduled for the next weekend. So, Kevin and Droz moved enough boards to from storage to the work site to ensure the local teen volunteers weren’t likely to run out of painting work. Unlike the previous weekend, this Saturday was warm and dry. And we had enough volunteers that we not only had them priming boards and screen trim, but cleaning some of these very dirty cabins.
With the responses coming in from recent emails and social media posts, we managed to increase our numbers of volunteers for Cabin Work Week. And the work on other fronts continued as we planned activities, purchased supplies, and continued other preparations for the main event at the end of October.
Sharing Space
After a summer of delays, our grandson was finally able to get his conversion van out of the shop and made a trial run in it to stay for a while with us at Pocahontas. We spent time together, helping him understand some of the ins and outs of living in an RV. We helped modify his mattress to fit the space, and Grandma made a cover for it. Grandpa helped him plan an electrical system for the van and mapped out the parts he would need. Then there were some leaks that Ophelia’s rains helped expose, and with some of Grandpa’s help were mostly sealed.
After a summer of delays, our grandson was finally able to get his conversion van out of the shop and made a trial run in it to stay for a while with us at Pocahontas. We spent time together, helping him understand some of the ins and outs of living in an RV. We helped modify his mattress to fit the space, and Grandma made a cover for it. Grandpa helped him plan an electrical system for the van and mapped out the parts he would need. Then there were some leaks that Ophelia’s rains helped expose, and with some of Grandpa’s help were mostly sealed.
His help was appreciated when we had to clear out the bed of the Ram and assemble and install running boards and the new hitch. And we enjoyed having some time together, whether it be over dinner or around the campfire.
Parting Shots
We did some exploring over our weekend in southwest Virginia, crossing into Tennessee to see the Bristol Caverns and the Birthplace of Country Music Museum.
We did some exploring over our weekend in southwest Virginia, crossing into Tennessee to see the Bristol Caverns and the Birthplace of Country Music Museum.
- Published on
We lost little time upon returning to Pocahontas to get started on preparations for the Cabin Work Week project. Being at Pocahontas also put us near our daughter’s family and our grandson Droz. So, we enjoyed reconnecting with them as well.
Cabin Work
The primary reason we need to be back in the park in September is to prepare an order for the rough cut lumber that we want delivered during the fall project. Since this year we will tackle the last of the 6 Group Cabin sites that remain standing, and our wood order is primarily for next year’s project, we needed to understand what 2024’s project would look like. After some discussion with park management, we worked out that plan, and were able to assemble this year’s order.
The primary reason we need to be back in the park in September is to prepare an order for the rough cut lumber that we want delivered during the fall project. Since this year we will tackle the last of the 6 Group Cabin sites that remain standing, and our wood order is primarily for next year’s project, we needed to understand what 2024’s project would look like. After some discussion with park management, we worked out that plan, and were able to assemble this year’s order.
Another focus of our time early in September is the recruiting of volunteers. We post flyers throughout the park, talk to our fellow campers, hikers, former volunteers, etc., and work with Max to respond to inquiries about the project that come into the park directly. But our most unlikely volunteers came about in a conversation with Twila and an 8th grader who was camping with his grandparents in the park. Thinking he might join a work day later in the year, Dave gradually came to understand that he didn’t want to wait weeks, he wanted to do something now. Never one to turn away a volunteer, we agreed to set up to paint screen trim at our site the next day. He quickly volunteered and recruited his brother to help. Just to make sure all was well, we stopped by to get their mom’s OK that night. Sure enough, first thing the next day, the boys arrived and began painting. Over the next couple of days, the boys finished enough trim for one of our 7 cabins, and they felt great about it, too.
And we did a little work ourselves too. There are many historic buildings in the park, not just in the group cabin area. They are in the day use area, the CCC field and even in Maintenance. The focus of a few weeks of effort was the Baker office building in Maintenance. The entrance had a small platform approached by a couple of stairs and a ramp. This needed resurfacing. Maintenance started the work, and a pair of our long-time volunteers called out of the blue and volunteered to finish the ramp and stairs. Greg, who runs monthly work days when we are not around, pressure-washed the building, and set up a work day to stain it. On that Saturday, we joined Greg and his volunteers to stain the building. The 7 volunteers made short work of the building, and left it looking better than it had in years.
Back at the 2nd Branch cabin site and at one of next year’s buildings, we took a saw and some loppers and moved branches back off the building, including a large one that had fallen on a porch roof, luckily doing no damage.
Family Fun
Camping at Pocahontas gives us free passes to the pool, and arriving just before Labor Day, we had only 3 days left to use them. So, we invited Droz and his hosts for the past few months, Brian and Jessica and family over for a swim and picnic on Saturday. We had a few errands to run, so we sent them up to the pool while we set up for the picnic. It was a beautiful day for a picnic, and everyone seemed to enjoy themselves. It had been several months since we had seen Droz and much longer since we had been with the Mounts.
Camping at Pocahontas gives us free passes to the pool, and arriving just before Labor Day, we had only 3 days left to use them. So, we invited Droz and his hosts for the past few months, Brian and Jessica and family over for a swim and picnic on Saturday. We had a few errands to run, so we sent them up to the pool while we set up for the picnic. It was a beautiful day for a picnic, and everyone seemed to enjoy themselves. It had been several months since we had seen Droz and much longer since we had been with the Mounts.
Unlike Saturday, the following Monday was going to be scorching hot, so we gladly accepted an invitation to visit with Bonnie’s family for some good food and good times together. Grandma Cathy and Taylor went several rounds solving Cat Crimes, and Troy tried to match his virtual road racing vehicle to Grandpa Dave’s truck. It was a great day, and we were glad to get the time together after so many months apart.
Parting Shot
This guy visited us and posed for a photo one day at our site.
This guy visited us and posed for a photo one day at our site.