Published on
Image description
Leaving Hilton Head, we drove north to Virginia and spent 10 days celebrating the holidays with friends and family and enjoying the beauty of Pocahontas in December. We were back in Jacksonville by the 28th to greet some travelers who were heading south, and planned to take a rest at Faith for the night. When the New Year’s fireworks were going up, we were making ready for work to begin in earnest around Faith a couple of days later.  ​
Image description
North to Virginia​

Since our reservation at the Pocahontas cabin didn’t start until Tuesday, we had the weekend to travel north. We had already made plans to stop by Steve and Linda’s in Poquoson. We had begun clearing their attic of our boating supplies earlier in the fall, and we planned to pick up some larger items on this trip to take them back to Orion Jr at Faith. We had a good visit with them as well and managed to find a place in the truck for the supplies that made sense to take with us – everything from a door from Orion Jr to a 9.8hp outboard.  
Image description
Our next stop was Pocahontas, and, arriving on the Tuesday before Christmas, we had arrived enough in advance of Christmas that we had time to decorate the cabin inside and out for the holidays. Part of those decorations included a “catalog” Christmas tree that was started by Twila from the park office staff back in the fall. After joking with Cathy about a Uline “Christmas” catalog, she patiently folded an 800 page catalog to make the tree, giving it to us as we left in November. However, Cathy realized that she actually needed a 2nd catalog to make the tree work. So, she found one and did the folding of that one herself. A can of green Rustoleum later and we had a Christmas tree. Having not make one in over 50 years, there was a lot she would do differently next time. 
Image description
Our first full day at the park turned out to be surprisingly busy. We started the day before sun-up.  After scraping the frost off the windshield (where is that ice scraper), we joined one of the park’s Winter Solstice hikes around Beaver Lake and watched the sun rise over the lake as we made our way around.
Image description
Shortly after returning to the cabin, we learned we would have company from Bonnie and the kids. With a major storm coming through the next day, we scrambled to get all of our grocery shopping done in time to get back to meet them. It was the first of several visitors we would host over the next few days. Driving through the campground, we discovered Micah and Jessica from Cabin Work Week were park hosts for the month, and we invited them over for dinner the following evening. The next day, despite the plummeting temperatures and near gale-force winds, Droz joined us for a Christmas get-together.  
Image description
On Christmas Eve, we hosted Bonnie’s family, cooking our 2nd prime rib dinner in as many years. The favor was returned the next day as we traveled to Jarratt to spend Christmas day with them. Our family time wasn’t over yet however. Chris and Carolyn arrived mid-day on Monday and Droz joined us for one more family reunion. They don’t get old.

The next morning, we served up all of the leftovers we could (having sent a healthy amount home with Droz on Monday), and then we said goodbye to Chris and Carolyn, heading south for Jacksonville as they returned to NC.
Cabin Work – sort of​

We had one Group Cabin project task to do while back at the park. A table saw had broken during the 2nd week of the project, and the saw was still under warranty. We had tried to get it repaired before leaving in November, but the receipt was hard to locate. By the time we had returned, the receipt had been located and the return approved. The return this time went smoothly and the warranty was honored. 
Image description
Back to Jacksonville
We were making our way to Jacksonville on a schedule. We had 2 couples planning to stop over at Faith on the 28th as they made their way further south into the Florida Keys. So, we made the trip with just one overnight, arriving a few hours before they both arrived. Dan and Karen were camp hosts during our stay at the park. Tom and Debbie had been Cabin Week volunteers for several years. We had a brief time to welcome them. After they enjoyed the hospitality of the church for a night, they were on their way south again the next am.
​
Image description
Another Year’s End

We were able to raise a glass to toast the end of 2022 and the start of 2023. We enjoyed putting together this video taking a look back at the year just ended. Hope you enjoy it too.

Published on
Image description
Arriving in Jacksonville in late November, we had only a couple of weeks before we would be heading north again. So, we did what we could to get a handle on the work that would be starting once we returned, and to follow up on activities that had been waiting for our return.


Image description
Church Projects​

Joe had arrived a few days before us, spending several days blowing off some of the many roofs at Faith. However, when we arrived, we joined forces on our first project. The highest lights in the sanctuary have needed new light bulbs for some time. However, how to reach them has been a problem. Joe devised a modification to an extension ladder that allowed him to climb up high and reach all but one. As his helpers on the ground, we steadied the ladder, passed supplies up and down and remained extremely grateful for his willingness to work up high. The chancel area is now brightly lit and looks great.   
Image description
A few days later, Pat and Fred arrived and, as frequently happens, we put them to work almost immediately. We were in the middle of creating a larger-than-life Advent wreath for the parsonage front lawn. Using a 4ft table top, an abandoned artificial lighted Christmas tree, 20ft of PVC pipe, several end caps, some lamp sockets, some flame-like bulbs and a 3 cans of spray paint, we set to work. To create the wreath itself, our first task was to dismantle the Christmas tree. Using some bolt cutters, we separated the tree limbs from the tree. And then we painstakingly took the lights from each limb until we had separate strands of lights, 3 of which still lit. Using the lights, we wrapped the greens securely into a circle to cover the outer edge of the table. Next we determined a good height for the PVC candles that would look correct in proportion to the wreath. Using the chop saw in the wood shop, Dave cut 4 to a 22” height for the outer candles and 1 several inches taller for the Christ candle.
Image description
Since it was already Friday of the first week of advent, our timeline was a little accelerated. Ideally, the caps would be wired for the lights before painting, or the painting would take place several days before the wiring, so it would be completely dry. That wasn’t going to happen. Cathy took the “candles” and paint and spray painted 3 purple, 1 pink and the tallest one white. After a couple of coats, the candles looked pretty good, but only a hour later, we had moved them back inside to install them on the table and begin wiring the lights.
Image description
The bottom caps were secured to the table with screws and the top caps removed to cut a hole big enough for the light socket. (After one not-so-centered socket hole was drilled, we had to swap the top and bottom caps on that candle.) As the sun set, we were installing the last of the sockets and wiring them together to a single plug. Since another candle needed to be lit each week, the sophisticated solution was to leave the unlit candle bulbs loose in the socket until that candle was to be lit.
​

Since time was of the essence, we loaded the wreath into the back of Pastor Barry’s truck and headed over to put it in place. To our delight, it looked pretty good. And it brought some Christmas to the parsonage lawn. Pat and Fred had barely had time to take a breath before they finished their first project.
Image description
For years, the back of the campground at Faith had been the place where some debris had accumulated, but in 2020 a number of pallets started arriving with more regularity due to the distribution of food in nearby apartment complexes. By the time we arrived this fall, the count was nearing 200. So, to regain the space and access to a couple of campsites, we got the green light to place an ad in Craigslist. Within a few days, over 100 pallets were on a trailer pulling out. The rest left a week later. Of course, in the intervening week, 11 more arrived. And so it goes.   
Image description
While the church had little damage from the recent hurricanes, one tree on the property didn’t survive one of the storms. The limbs had been cut away, but needed to be hauled away. With the unseasonably warm temperatures, disentangling these limbs and cutting them to manageable lengths was hot work. We were grateful when the last of the debris had been removed and we could get out of the heat.  
Image description
Dave is the go-to parts guy for all this maintenance activity. And since we were heading north on the 12th of December, he did what he could to ensure those staying behind had what they needed to keep going on their projects. And, of course, we spent time working on the internet. There were several issues still outstanding since the summer’s lightning strike that could only be addresses in person. Cathy inventoried all the switches across the campus and collected 4 that needed to be returned. Dave worked on solving some problems with the livestream as well as problems in other spots on the campus. Of course, there will be more to do. Meanwhile Pat and Fred started working on several small engines: a blower, lawn mowers, etc. Butch and Cheri arrived about a week after we did, and within days he was fixing water pipes and working on tuning up the tractor.  

Dave is the go-to parts guy for all this maintenance activity. And since we were heading north on the 12th of December, he did what he could to ensure those staying behind had what they needed to keep going on their projects.  
Image description
RV Stuff

Shortly after arriving at Jacksonville, the latch on a large drawer in the galley broke off and would no longer secure the drawer shut. Luckily this happened after we were done moving for quite a while. Cathy ordered some replacements and worked to install them. While all of the “how-to” videos show how easy the installation is in a cabinet, the demos were not being done upside down inside a drawer. After much too long, she managed to get the replacement installed. However, since the latch was slightly smaller, it didn’t grab as tightly as the one it replaced, and this was a very big drawer (almost 3 ft). To ensure it stayed closed underway, she installed 2 latches equally spaced from the center line to give more holding power. 
Image description
Disney – Hilton Head

It was our second year visiting the Disney Hilton Head resort for a few days in mid-December. The time there was spent relaxing and enjoying the beautiful area around the resort.