- Published on
The Seafood Festival marks a tipping point of sorts for the winter season in Marathon. Soon after it ends, the waiting list for moorings shortens and then disappears. During the morning net, we are "saying goodbye" to more departing vessels, than "hello" to new boats in the harbor. And, for us, it means that we realize the number of days before we haul Orion Jr out of the water for the trip north is quickly decreasing. As a result, we become more – hmm – focused on any boat projects that have been deferred until now.
Cooling Down As Temperatures Rise
The temperatures were rising and staying up. Of course that was true of the outside air temperature, but we were much more focused on the ice box and freezer temperatures than the increasing heat. Not that they were unrelated. Once we realized we had a problem, it was becoming increasingly difficult to get the cold storage temperatures back down to where they should be. Our bottles of ice were coming out of the freezer less than solidly frozen. Which meant the ice in the bottles wasn't lasting two days as was necessary to ensure a cold enough ice box. We actually wanted to freeze more bottles of water, but with the freezer struggling with its current load, this wasn't going to work.
We started tackling the problem on a number of fronts. First, we looked at the overall temperature in the boat. As the days and nights were warming up, the boat's interior temperature would soar and not cool down until late in the evening. So, we started leaving the forward hatch open during the day. (Of course, the 2nd day we tried this, we had an unexpected downpour while we were away from the boat.) We also discovered that the solar vent battery was not charging any more and the vent had not been running as it should. So, we replaced it and got it charged up. This would give us ventilation when the hatch had to be closed. We tried adding a tarp over the forward deck, covering the hatch (which was a trade-off, since the solar vent couldn't charge). This helped some, but it was still pretty warm below, rising to the mid to upper 80's during the day.
We also tried working on reducing the work the freezer would have to do. We used our connections with Paul at the Seafood Festival to freeze a few bottles of water overnight each night of the festival in their refrigerated trucks, where they kept the frozen goods. This worked great. We had solid bottles of water for the ice box in the morning and even had some to spare to put into the freezer. By the end of the weekend, the ice box temperatures were staying in the low 40's, where we like to see them. We also had 4 bottles of ice to cycle in each day (2 large and 2 small), which was making the cycle repeatable.
However, the freezer was still struggling with temperatures in the mid- to upper 20's. Too warm. Dave had another idea from the reading he had done on the internet. He added a fan outside the freezer, blowing air into the vents on one side. These had been feeling very warm, making Dave think the internal fan was struggling to dissipate the heat. This turned out to be silver bullet. The freezer was able to chill down to the teens and even single digits on occasion! Since then, we've managed to keep the equilibrium in both the ice box and freezer, so the system is working again.
I think I'll have a cold drink to celebrate.
The temperatures were rising and staying up. Of course that was true of the outside air temperature, but we were much more focused on the ice box and freezer temperatures than the increasing heat. Not that they were unrelated. Once we realized we had a problem, it was becoming increasingly difficult to get the cold storage temperatures back down to where they should be. Our bottles of ice were coming out of the freezer less than solidly frozen. Which meant the ice in the bottles wasn't lasting two days as was necessary to ensure a cold enough ice box. We actually wanted to freeze more bottles of water, but with the freezer struggling with its current load, this wasn't going to work.
We started tackling the problem on a number of fronts. First, we looked at the overall temperature in the boat. As the days and nights were warming up, the boat's interior temperature would soar and not cool down until late in the evening. So, we started leaving the forward hatch open during the day. (Of course, the 2nd day we tried this, we had an unexpected downpour while we were away from the boat.) We also discovered that the solar vent battery was not charging any more and the vent had not been running as it should. So, we replaced it and got it charged up. This would give us ventilation when the hatch had to be closed. We tried adding a tarp over the forward deck, covering the hatch (which was a trade-off, since the solar vent couldn't charge). This helped some, but it was still pretty warm below, rising to the mid to upper 80's during the day.
We also tried working on reducing the work the freezer would have to do. We used our connections with Paul at the Seafood Festival to freeze a few bottles of water overnight each night of the festival in their refrigerated trucks, where they kept the frozen goods. This worked great. We had solid bottles of water for the ice box in the morning and even had some to spare to put into the freezer. By the end of the weekend, the ice box temperatures were staying in the low 40's, where we like to see them. We also had 4 bottles of ice to cycle in each day (2 large and 2 small), which was making the cycle repeatable.
However, the freezer was still struggling with temperatures in the mid- to upper 20's. Too warm. Dave had another idea from the reading he had done on the internet. He added a fan outside the freezer, blowing air into the vents on one side. These had been feeling very warm, making Dave think the internal fan was struggling to dissipate the heat. This turned out to be silver bullet. The freezer was able to chill down to the teens and even single digits on occasion! Since then, we've managed to keep the equilibrium in both the ice box and freezer, so the system is working again.
I think I'll have a cold drink to celebrate.
Varnishing the Hard Way
"Honey, have you seen the varnish?", Cathy asked innocently, despite her growing unease that it wasn't anywhere to be found. Not surprisingly, Dave hadn't seen it all season. But Cathy had. Soon after arriving in Marathon, she had moved it from its normal, difficult-to-reach location far forward to some compartment further aft. But when she looked where it should be – nothing. After turning out every compartment on board, and even scouring the truck, she was beside herself with frustration. The wood had all been prepped. The weather was perfect for varnishing. Where was it?
And then, it clicked. She removed all the contents of the starboard compartment in the V-berth, took a flashlight and a mirror and stuck it down inside. Way down in an inaccessible part of the bilge sat the nearly full quart can of varnish. Now, what? With no obvious solution for retrieving it, she hedged her bets and ordered another can. It would take a week to arrive. In the meantime, she needed to think of a way to retrieve it. Having a rusty can of varnish leaking its contents into the bilge on some future date was a pretty ugly scenario.
The first idea was a BIG magnet. She quickly got a response when she put out the call on the net from a nearby boat. Of course this required wedging her upper body into an opening that was just big enough in order to maneuver the magnet, a PVC pole, a flashlight and a mirror into the hole. After 4 hours of repeated attempts, she had managed to turn the can from its upright position onto its side, and lose 2 mirrors and a flashlight. On the positive side, she managed to retrieve 2 long-missing screwdrivers and the flashlight. The trend was not good, though. Time to go back to the drawing board.
Giving the bruises time to heal, it took a couple of days and a scouring of shelves at Home Depot to devise the next approach. It involved a garden fork. Initially, this managed to pull the 2 mirrors out, but was it possible that the varnish was getting further away? Yep. Maybe it was time to cut a hole in the Main Saloon floor? Dave wasn't buying this.
So, back to the compartment from hell. She needed something that could solidly hold the garden fork, start out short and telescope to the far end of the bilge where the varnish now sat. Dave came up with the tiller extension. Although Cathy was losing hope, it seemed to be the best idea. After a few more misses, she was able to move the can just a little. Then a little more. It would slip back some, but not all the way. Slowly. Slowly. Closer. Closer. Closer. GOT IT! Hooray!!!
"Honey, have you seen the varnish?", Cathy asked innocently, despite her growing unease that it wasn't anywhere to be found. Not surprisingly, Dave hadn't seen it all season. But Cathy had. Soon after arriving in Marathon, she had moved it from its normal, difficult-to-reach location far forward to some compartment further aft. But when she looked where it should be – nothing. After turning out every compartment on board, and even scouring the truck, she was beside herself with frustration. The wood had all been prepped. The weather was perfect for varnishing. Where was it?
And then, it clicked. She removed all the contents of the starboard compartment in the V-berth, took a flashlight and a mirror and stuck it down inside. Way down in an inaccessible part of the bilge sat the nearly full quart can of varnish. Now, what? With no obvious solution for retrieving it, she hedged her bets and ordered another can. It would take a week to arrive. In the meantime, she needed to think of a way to retrieve it. Having a rusty can of varnish leaking its contents into the bilge on some future date was a pretty ugly scenario.
The first idea was a BIG magnet. She quickly got a response when she put out the call on the net from a nearby boat. Of course this required wedging her upper body into an opening that was just big enough in order to maneuver the magnet, a PVC pole, a flashlight and a mirror into the hole. After 4 hours of repeated attempts, she had managed to turn the can from its upright position onto its side, and lose 2 mirrors and a flashlight. On the positive side, she managed to retrieve 2 long-missing screwdrivers and the flashlight. The trend was not good, though. Time to go back to the drawing board.
Giving the bruises time to heal, it took a couple of days and a scouring of shelves at Home Depot to devise the next approach. It involved a garden fork. Initially, this managed to pull the 2 mirrors out, but was it possible that the varnish was getting further away? Yep. Maybe it was time to cut a hole in the Main Saloon floor? Dave wasn't buying this.
So, back to the compartment from hell. She needed something that could solidly hold the garden fork, start out short and telescope to the far end of the bilge where the varnish now sat. Dave came up with the tiller extension. Although Cathy was losing hope, it seemed to be the best idea. After a few more misses, she was able to move the can just a little. Then a little more. It would slip back some, but not all the way. Slowly. Slowly. Closer. Closer. Closer. GOT IT! Hooray!!!
So, a week after she thought she was going to get started, the first coat of varnish finally went on.
And then, of course, another can arrived in the mail.
Well, we surely won't run out of varnish this year.
And then, of course, another can arrived in the mail.
Well, we surely won't run out of varnish this year.
Making Better Connections
Shortly after arriving in Marathon, we started listening to the morning VHF radio net. (Basically, this is a daily get-together for the boats in the harbor to know what's going on and to help each other out.) However, we quickly discovered we were missing large sections because we couldn't hear boats that were more than a short distance away. Since it's not that big of a harbor, we started to suspect it was our VHF radio that was the problem, not the boats that were transmitting. Although we installed a new VHF back in 2011, along with a new wire up the mast to the antenna, there was a weak link in the set-up. The wire that ran from the base of the mast inside the cabin to the radio was original and, as such, suspect. We didn't know how old it was, and there was an unnecessary splice in the middle, which would degrade the signal by its presence even in the best of conditions. So, we were pretty sure that replacing this length would improve our reception and likely our transmission as well.
Once Dave had assembled all of the wire and connectors needed to install it, we were ready to begin. His attention was first put on the most vulnerable section, which was the 2 ft length that sits on deck between the base of the mast and the deck fitting. He was able to protect the new wire with some heat shrink, which he could add before the connectors went on. However, the existing wire from the mast needed some protection as well, and heat shrink wouldn't work because of the connector already in place. So, he used a liquid electrical tape to coat it. This would give some better protection from both UV and water damage.
Now we were ready to run the wire through the deck into the boat's interior. It was pretty easy to route it along the same path as the wire it was replacing all the way into the Main Saloon. At that point, we were able to remove the klunky splice and have a seamless run along the top of the wall back to the radio. With the longer wire, it could also be routed into the radio from behind and more out the way. Dave could then solder on the final fitting to connect to the radio. And a quick test revealed we were back on the air. During the next morning's net we could hear clearly and seemed to be heard as well. Some of the transmissions that had been full of static were clear now and we were less impacted by the electronic devices charging on the boat. Pretty good reinforcement that this was the answer to the problem.
We still wondered about what would happen when we took the mast down and the connection sat exposed for several months. Not only were the VHF connections exposed. We also had connections for the anchor light and the stereo speakers. To make the process of stowing and commissioning the boat easier, Dave had just installed a two-pin connector on the engine wires as well. These are all vulnerable to corrosion. From Dick on Tarwathie, Dave learned of a possible solution, called Carbon Conductive grease. It protects the metal connections from corrosion and promotes conductivity across them. So, Dave not only put this on the VHF radio connections on deck, he also coated all of the pins for the connections that would be exposed once we trailer the boat: the engine wire, anchor light, stereo speakers, etc. The hope is that when we re-commission the boat after several months of idleness, we won't have as many connections that need to be cleaned of corrosion. Only time will tell.
Cleaning Up
Boats, both inside and out, are breeding grounds for unwanted growth. With the solar fan out of commission, the 4 weeks in storage over Christmas had not been kind to Orion Jr's interior. Mildew was everywhere. As a result, Cathy was having trouble with allergies for the first time in years. Red, itchy eyes. So, we started cleaning out all the compartments, washing cushion covers, spraying with Lysol, and airing things out. Unfortunately, our weight reduction exercise in the fall had removed the ozone generator. A quick call out on the net yielded one for a loaner and the problems seemed to resolve themselves.
But that's just the inside. Up on deck, the accumulated grime from months of just sitting had never completely been cleaned off. Cathy took advantage of a rain storm rinse to wax the freshly washed deck and take off some of the tougher dirt. It never really shines, but it does protect what's there. With the warmer temperatures, the organisms start finding the places to grow below the waterline as well. We started to be more rigorous in cleaning the dinghy bottom each week. And Dave started scraping the bottom of the big boat weekly as well, reaching as far as he could from the dinghy. So far, the barnacles are few and small, but that is gradually changing. And it's not just our boat. Dave found himself working on a friend's outboard that was showing signs that the water flow was less than it should be because the intakes were fouled. With some elbow grease, the flow seemed to be restored.
So, for a minute, everything looks spic n span. And then it starts all over. It's all in a day's work on a boat.
Boats, both inside and out, are breeding grounds for unwanted growth. With the solar fan out of commission, the 4 weeks in storage over Christmas had not been kind to Orion Jr's interior. Mildew was everywhere. As a result, Cathy was having trouble with allergies for the first time in years. Red, itchy eyes. So, we started cleaning out all the compartments, washing cushion covers, spraying with Lysol, and airing things out. Unfortunately, our weight reduction exercise in the fall had removed the ozone generator. A quick call out on the net yielded one for a loaner and the problems seemed to resolve themselves.
But that's just the inside. Up on deck, the accumulated grime from months of just sitting had never completely been cleaned off. Cathy took advantage of a rain storm rinse to wax the freshly washed deck and take off some of the tougher dirt. It never really shines, but it does protect what's there. With the warmer temperatures, the organisms start finding the places to grow below the waterline as well. We started to be more rigorous in cleaning the dinghy bottom each week. And Dave started scraping the bottom of the big boat weekly as well, reaching as far as he could from the dinghy. So far, the barnacles are few and small, but that is gradually changing. And it's not just our boat. Dave found himself working on a friend's outboard that was showing signs that the water flow was less than it should be because the intakes were fouled. With some elbow grease, the flow seemed to be restored.
So, for a minute, everything looks spic n span. And then it starts all over. It's all in a day's work on a boat.
Enough of the work stuff. . .
We managed to squeeze in a few things between projects. Miami and Shelly from Yume joined us for a snorkeling trip to Sombrero. And Captain Jack was our guest at the SSCA lunch at Hurricane. We got to meet the folks on Vixen, fellow Beneteau owners, who had been corresponding with us over the past couple of years. But there were a couple of stand-out events that we want to highlight.
We managed to squeeze in a few things between projects. Miami and Shelly from Yume joined us for a snorkeling trip to Sombrero. And Captain Jack was our guest at the SSCA lunch at Hurricane. We got to meet the folks on Vixen, fellow Beneteau owners, who had been corresponding with us over the past couple of years. But there were a couple of stand-out events that we want to highlight.
Sunset Sail in Key West
We made our annual trip to Key West and took a friend, Tarun, who had some business to attend to there. After the work was done, we wondered Duval St as usual, checked out the Eco-Discovery Center and had dinner on half-price appetizers at Alfonzo's Oyster Bar. However, by far the highlight of the trip was the opportunity to sail on the Spirit of Independence, a schooner captained by Tarun's friend, Captain Rick. It was a beautiful ship, a lovely evening and we felt like we had the run of the ship. Dave even took the helm for a bit. If you're ever in Key West, look for them on the wharf. You won't be disappointed.
We made our annual trip to Key West and took a friend, Tarun, who had some business to attend to there. After the work was done, we wondered Duval St as usual, checked out the Eco-Discovery Center and had dinner on half-price appetizers at Alfonzo's Oyster Bar. However, by far the highlight of the trip was the opportunity to sail on the Spirit of Independence, a schooner captained by Tarun's friend, Captain Rick. It was a beautiful ship, a lovely evening and we felt like we had the run of the ship. Dave even took the helm for a bit. If you're ever in Key West, look for them on the wharf. You won't be disappointed.
Dinghy Concert at Docksides
For the first time, we participated in a Dinghy raft-up at Docksides, a bar that sits on the southeast edge of Boot Key Harbor. The occasion was a benefit for a local veteran. It was initiated by Gary Hannan, a songwriter from Nashville, who was on a tour to raise money for local vets. He was joined by 3 other local songwriters for a performance in the round. The unusual part was that Docksides allowed us to raft our dinghies outside to expand the audience. So we sat in comfort on the water and listened to some amazing performances. In the end, almost $2000 was raised for the benefit.
For the first time, we participated in a Dinghy raft-up at Docksides, a bar that sits on the southeast edge of Boot Key Harbor. The occasion was a benefit for a local veteran. It was initiated by Gary Hannan, a songwriter from Nashville, who was on a tour to raise money for local vets. He was joined by 3 other local songwriters for a performance in the round. The unusual part was that Docksides allowed us to raft our dinghies outside to expand the audience. So we sat in comfort on the water and listened to some amazing performances. In the end, almost $2000 was raised for the benefit.
Parting Shots
While Cathy was up on deck waxing one morning, a dolphin was circling the boat, which caught her attention. It turned out it was chasing a fish that was using our mooring ball and pennant as interference. I'm sure it didn't go well for the fish, but it was amusing to watch the chase.
While Cathy was up on deck waxing one morning, a dolphin was circling the boat, which caught her attention. It turned out it was chasing a fish that was using our mooring ball and pennant as interference. I'm sure it didn't go well for the fish, but it was amusing to watch the chase.
- Published on
March is the peak of the winter season in Marathon, with more boats in the harbor and more activities on shore than probably any other time of the year. Needless to say, we were in the thick of many of the activities. That left less time for boat projects, but we managed to squeeze a few in -- some more urgent than others.
Cleaning Up
There is a lot of junk that ends up in the water in any harbor. We saw that on our clean-up day back in the Hampton River. However, we had our first opportunity to participate in a clean-up day here in Boot Key Harbor on the first Saturday of March. It was a dinghy clean-up and we were assigned an area west of the harbor, along Boot Key, where the mangroves are thick and greedily hoard all the debris that the prevailing east winds will send them. We motored toward the outer edge of our territory where Sisters Creek begins. Before we made it all the way there we found our first prize: some ice bags and beer boxes from a small mangrove island at the edge of the harbor.
There is a lot of junk that ends up in the water in any harbor. We saw that on our clean-up day back in the Hampton River. However, we had our first opportunity to participate in a clean-up day here in Boot Key Harbor on the first Saturday of March. It was a dinghy clean-up and we were assigned an area west of the harbor, along Boot Key, where the mangroves are thick and greedily hoard all the debris that the prevailing east winds will send them. We motored toward the outer edge of our territory where Sisters Creek begins. Before we made it all the way there we found our first prize: some ice bags and beer boxes from a small mangrove island at the edge of the harbor.
As we made our way into the mangroves, the shallows forced us to abandon the motor for the oars and we made our way cautiously into the brambles. It quickly became obvious that the boat hooks would not retrieve this stuff from the dinghy. One of us would have to get out and get dirty. Cathy was first, retrieving a five gallon bucket of some liquid, a plastic crate, several bags, more beer boxes, etc. But Dave couldn't be left out. When we saw the distant 30-gallon garbage can in a seemingly impassable section of mangroves, he was there. After some frustrating slips of the boat hook, he managed to maneuver it to the dinghy and we carted to our "buy boat", a larger inflatable with a center console that couldn't do the shallow stuff. They collected from us and others and took it to the "mother ship" -- a larger fishing boat run by no other than Paul Lebo, the coordinator for the food booth volunteers at the Seafood Festival.
We continued to look for and find some amazing things, the most unusual and definitely the most difficult to retrieve was a large wooden, sandbox-like structure. It was heavy on its own, but had filled with sand and water, which we couldn't unload. So we dragged it like a sea anchor, with Dave holding on to it from the bow and Cathy trying to row the boat against it. As we made inches of progress out of the mangroves, our "buy boat" made its way closer and we met in the middle. Now they were weighted down so much that they couldn't make good progress. The other "mother ship" from the City Marina had to work its way over to them to retrieve the heavy stuff. Holly, on her kayak, came over to run a line between the two boats and help the marina boat load the trash. Of course, she first had to unload the TV that she had collected (on her kayak?).
At any rate, by the days end, we and our fellow garbage men had filled a dumpster to overflowing, and a garbage barge (a derelict boat that we filled with garbage). It was amazing, gratifying, but disturbing at the same time. After scrubbing the dinghy clean of mangrove bits, muck and slime, we joined the others for a picnic and swapped stories of our finds. There was also a competition of sorts, using an app called Goose Chase to run a scavenger hunt. To participate, you had to take pictures of your team before and after, and of some specific kinds of garbage you found. One item that scored points was a TV. Although 6 were actually found during the clean-up (including Holly's), let's just say our TV was found a little after the clean-up. I think they disqualified the points for it.
Tall Tales
After the success of February's Storytelling get-together, we helped organize a second one. Dave regaled the crowd with his story of how we started out with little experience, yet managed to get insurance on our 36ft boat. One of the more moving stories was one Miami told about his family's 3-day search for their dog, Goose, who had become lost on an uninhabited island off the coast of Georgia. (You can read this story on Yume's blog through this link. )
Boaters, like most people, love to tell stories and some of us have more to tell than others. Captain Jack is one of those. At 93, he's been on boats for much of his life, currently living aboard his 28ft sailboat, Fantasea, at the marina. Along with Miami and Shelly, we helped organize a night to hear Jack's stories. Miami brought his sound system ashore and (after some food, of course) interviewed Captain Jack about his life and adventures. Captain Jack quickly got into it, taking us from a high rise in Chicago, to a farm in Indiana, to a boiler room in an Army ship in the South Pacific, to St. Petersburg, where he bought his first sailboat, and finally to southeast FL and Marathon. And it was fun taking the journey with him.
After the success of February's Storytelling get-together, we helped organize a second one. Dave regaled the crowd with his story of how we started out with little experience, yet managed to get insurance on our 36ft boat. One of the more moving stories was one Miami told about his family's 3-day search for their dog, Goose, who had become lost on an uninhabited island off the coast of Georgia. (You can read this story on Yume's blog through this link. )
Boaters, like most people, love to tell stories and some of us have more to tell than others. Captain Jack is one of those. At 93, he's been on boats for much of his life, currently living aboard his 28ft sailboat, Fantasea, at the marina. Along with Miami and Shelly, we helped organize a night to hear Jack's stories. Miami brought his sound system ashore and (after some food, of course) interviewed Captain Jack about his life and adventures. Captain Jack quickly got into it, taking us from a high rise in Chicago, to a farm in Indiana, to a boiler room in an Army ship in the South Pacific, to St. Petersburg, where he bought his first sailboat, and finally to southeast FL and Marathon. And it was fun taking the journey with him.
And Then There's Seafood
Dave started making announcements for volunteers on the morning Net in late February. Since the volunteers would call the Chamber of Commerce directly, we never knew how effective the recruiting efforts were. However, as the time for the festival arrived, we were about to find out. Due to a turnover in the Chamber's staff only a couple of weeks before the festival, Dave decided we needed to step in to help.
The Chamber of Commerce is 5 miles away from the marina, a distance too far for most boaters, since most have no car. Dave had offered to deliver the T-shirts, which are the entry ticket for the volunteers, to the boaters in the harbor. All they had to do was give the Chamber their location in the harbor. With the change in staff, this information was not being collected. So, we announced on the net that anyone who had volunteered contact us. Wow! We had over 50 people on 30 boats. It took us most of an afternoon to deliver all the shirts, but by the day before the festival started, they were all in the volunteers' hands.
Dave started making announcements for volunteers on the morning Net in late February. Since the volunteers would call the Chamber of Commerce directly, we never knew how effective the recruiting efforts were. However, as the time for the festival arrived, we were about to find out. Due to a turnover in the Chamber's staff only a couple of weeks before the festival, Dave decided we needed to step in to help.
The Chamber of Commerce is 5 miles away from the marina, a distance too far for most boaters, since most have no car. Dave had offered to deliver the T-shirts, which are the entry ticket for the volunteers, to the boaters in the harbor. All they had to do was give the Chamber their location in the harbor. With the change in staff, this information was not being collected. So, we announced on the net that anyone who had volunteered contact us. Wow! We had over 50 people on 30 boats. It took us most of an afternoon to deliver all the shirts, but by the day before the festival started, they were all in the volunteers' hands.
We also started our working early, when we showed up Friday night and helped with some of the set-up activities for Paul and the food booth. We worked until after dark and then promised to be back the next day. Unlike previous years, we were needed most up front at the cash registers and serving food. Thousands of dollars passed through our hands over the two days. (And yes, it all made it into the till.) We don't know how much they made, but it had to be a good year. On Monday, Dave returned to help Paul break down the tents, harvest the oil for the Bio-diesel firm to pick up and clean the fryers. It sounds like a lot of work, but we wouldn't do it each year, if we weren't enjoying ourselves as well. And we did enjoy the food, of course.
Boat Stuff
New Chartplotter mount
Over the holidays, they had worked on it for hours. Dave and his brother-in-law (also a Dave) were tackling the problem of how to redesign our chartplotter mount to accommodate the new tachometer. Brother-in-law Dave had a workshop full of power tools, the skills to use them, and an engineering background for solving these problems. So, it wasn't surprising that in the process of adding the tach, they had worked out an ingenious system to remove the klunky clamps that had held the chartplotter in place while underway. (You had to make sure you ducked low when going down the companionway stairs.) Once in Marathon, we were ready to put the solution in place.
New Chartplotter mount
Over the holidays, they had worked on it for hours. Dave and his brother-in-law (also a Dave) were tackling the problem of how to redesign our chartplotter mount to accommodate the new tachometer. Brother-in-law Dave had a workshop full of power tools, the skills to use them, and an engineering background for solving these problems. So, it wasn't surprising that in the process of adding the tach, they had worked out an ingenious system to remove the klunky clamps that had held the chartplotter in place while underway. (You had to make sure you ducked low when going down the companionway stairs.) Once in Marathon, we were ready to put the solution in place.
We replaced the base of the chartplotter, which was a varnished piece of wood, with a piece of starboard. The tach would be mounted in a custom-made starboard box beside the chartplotter, secured to the same starboard base. To secure the base to the top of the companionway, the key was to devise a solution that would not require any holes being drilled in the companionway hatch. To do this, 2 small strips of starboard would be permanently attached with VHB (Very High Bond) double-sided tape. These would lock the mounting board in place. With the help of a sliding lock on the starboard side of the mount (the ingenious part of the design), we could easily remove the unit containing the chartplotter and tach and store them below.
When doing an initial fitting, Dave discovered the base and its locking strips were just a little too wide. After a bit of filing, the fit was perfect. Once we decided on a location, we marked the location of the locking strips on the companionway hatch. We cleaned both surfaces with alcohol, applied the tape to the blocks of wood and then secured them to the hatch. It was then just a matter of putting the slide onto the base, inserting it into its place between the 2 blocks and voila`, the instruments were locked in place. It's almost too easy now.
Slide lock on the base of the mount
Sewing Work
"Cathy on Orion Jr can do canvas work". Cathy was looking at the VHF radio during the morning net, wondering if she had just heard right. Someone was looking to get some repairs done and the local canvasmaker wasn't available for a few days. Our friends on Natalie had just volunteered our services. Ummm. At any rate, Cathy was at work again. This time she was repairing tears in enclosure panels and cushions. It was a full day's work, but the customer seemed to be happy in the end. She had the use of her sewing machine for a few projects for us as well, making a cover for the trailer winch and new shades to completely surround the cockpit. This will help if we need to take showers there to give us some privacy.
"Cathy on Orion Jr can do canvas work". Cathy was looking at the VHF radio during the morning net, wondering if she had just heard right. Someone was looking to get some repairs done and the local canvasmaker wasn't available for a few days. Our friends on Natalie had just volunteered our services. Ummm. At any rate, Cathy was at work again. This time she was repairing tears in enclosure panels and cushions. It was a full day's work, but the customer seemed to be happy in the end. She had the use of her sewing machine for a few projects for us as well, making a cover for the trailer winch and new shades to completely surround the cockpit. This will help if we need to take showers there to give us some privacy.
Parting Shots
We headed out for a day sail and ended up snorkeling out at Sombrero Reef. We sailed most of the way there and back on a beautiful day. Cathy got to use her new Dive float for the first time, which let her wander farther from the boat.
We headed out for a day sail and ended up snorkeling out at Sombrero Reef. We sailed most of the way there and back on a beautiful day. Cathy got to use her new Dive float for the first time, which let her wander farther from the boat.