Published on
Image description
Orion is officially on the market after a couple of weeks cleaning her up and taking care of some cosmetic work to make her look her best.  In between boat projects, we got back to swimming and got to visit with the grandkids for a bit as well.

Image description
Cleaning up the Caprail
There was only one major project to be done on Orion before we put her on the market.  The teak around the forward and mid-cleat on the starboard caprail needed to be replaced since it had split due to the problem with the cleat installation typical of Beneteaus (i.e., an stainless steel cleat in a aluminum sleeve that expands and contracts due to the dissimilar metals in the saltwater environment).  While we were considering our options, we discussed the problem with a recent arrival on the dock at Joy’s Marina.  Dan had some woodworking skills and offered to do the job for a very good price.  So, we just needed to marshal the supplies and the work could begin.

Image description
We had already purchased the teak and new cleats from Beneteau last summer.  Since the teak has to come from France, which takes about 12 weeks, we wanted to get it in while we were in one place and could arrange for its shipment.  The teak comes in sections.  We purchased the forward section for the starboard side.  We would cut this to fit both the forward cleat and the mid-cleat.  The final supplies were more easily acquired:  Maritime teak caulk some ½” teak plugs, some Tef-gel and epoxy.  

Once the supplies were assembled and the weather cleared, Dan and Dave got to work.  First, they removed the old cleat, popped the teak plugs, and removed the screws holding the forward section in place.  After making a cut in the teak which would become the new seam, the existing teak was pried off and the fiberglass underneath cleaned of the original caulk. The teak from Beneteau was pre-drilled with holes for the cleat and the screws, which made the bow cleat installation a little easier than the mid-cleat.   To prevent the split from recurring, the original metal spacer would be replaced with FRP to prevent the expansion problem.  Dave and Dan filled the pre-drilled holes with FRP, which would become the new spacer.  Once set, it was sanded and drilled to allow the cleat bolt to move smoothly through. 

After a final fitting and adjustments to ensure a smooth transition to the existing wood, Dan applied the caulk to the deck and the seam, then fitted the new board in place.  Once the new cleat was installed, the teak plugs were fitted in place, and the repair was complete.  The mid-cleat required a little more work, since the teak rail was not cut for that section of the boat.  This required more work to cut the board to fit and to ensure the cleat and screw holes lined up. 

Once both repairs were complete, Cathy took a day to strip and sand the entire rail, then re-finish with Cetol Natural Teak  -- something she’s been wanting to do for several years now.  The starboard caprail now shines like the rest of Orion’s brightwork, which now actually earns that description.

Image description
And what about the rest of Orion?

 With the caprail repair done, what else was there to do?  Nothing major, but a lot of little things that would make the boat show her best. 

Fresh Water: Since the fresh water had been winterized, we emptied, refilled it with some bleach added and then emptied and refilled it again.   The antifreeze had fouled the PurestOne filter as well, so we replaced it.  We now routinely drink the water again.

Head/Holding Tank: We put several gallons of vinegar through the head into the holding tank and let it sit for several days to eat away anything left in the lines and the holding tank.  Now the head has no odor at all. 

Bimini / Enclosure: With the sewing machine back in Hampton, Cathy took down the bimini and re-stitched all its seams and bindings.  She inspected the enclosure panels and re-stitched any that needed it.  Finally, she cleaned and polished the strataglass panels.

Coast Guard Safety Inspection:  We checked over our safety supplies and prepared for a safety inspection. We realized we had taken Orion's flares to the little boat by mistake, so we bought some more and passed our inspection with flying colors.

On Deck: Cathy stripped the swim platform, the swim ladder stairs and the cockpit drain, which were showing some more wear than the other wood.  She re-applied the Cetol to all the wood on deck and it’s looking the best it has in years.  She also waxed the deck and polished the stainless steel to add to the shine. 

Engine: Having changed oil and filters before leaving in the fall, we just had to run the antifreeze out of the engine and it was ready to go.

Bilge: We checked under the floor boards and cleaned under all of them.  The bilge pump in the aft cabin, which had been wired to run continuously when installed, was changed to switch on only when the instruments were on or the manual switch was thrown.  This will prevent it from accidentally running down the batteries.  The bilge pump in the main saloon had been inadvertently disabled when our friend cleaned out the filter and didn’t secure the cover cleanly.  Once back in place the bilge worked fine.

Bottom Cleaning: Our friend Sue cleaned the bottom and replaced the zinc.

Instruments / Electronics:  We turned on the instruments and checked out the electronics.  Some work done over the winter had jostled a connection loose under the helm that was easily restored. 

Deck Washdown: Another problem we discovered was the deck washdown fitting under the sink in the head had broken, presumably due to too much pressure being applied by items stored in the compartment.  Dave ordered a new fitting and installed it, but we were grateful we discovered it before we opened the thru-hull for the deck washdown.  Whew!

With the boat cleaned up and in shipshape, Dave began placing ads on various internet sites and posting flyers locally.  Thanks to his efforts, we’ve already had a few inquiries and have shown the boat once.  We’ll see how it goes.  

Image description
So, as we spend our time in Hampton, we're enjoying our friends and family here, as well as those who keep passing through at the Public Piers across the river.  Most recently, we saw Patty and Frank on Dream Weaver, who made their first trip to Hampton this year.  We showed them the sites and after a few days said goodbye as they headed up the bay.  If you're passing through this way, stop into Hampton.  We'd love to see you. 
Published on
Image description
She’s stripped down and tied up, sitting in her freshwater slip in LaBelle.  Orion Jr is as prepared as we can make her for the coming months of her stay in central Florida.  We’ve returned north to Hampton and are back on Orion, getting her ready to put her up for sale. 

Image description
Getting Jr Ready

We pulled into Port Labelle Marina on a windy Thursday afternoon, stopping first at the few floating slips with power near the fuel dock.  From this location, we could wash her down, charge up the batteries, do laundry and finish any other tasks that require water or power.  We had a long list of things to do and the marathon was just beginning.  It would take us all of the next 5 days to get them all done before we got in the car and headed north.   (For an inventory of the things we did to get her ready, see the checklist we prepared.)

Image description
The marina is in a rural area, about 2 miles out of the town of LaBelle.  This is what they call the real Florida.  We woke up in the morning to hear cows mooing and saw alligators and turtles swimming in the marina basin.  For most of our stay, the winds were up, keeping the bug population down, but we were sure to put screens in every night.  There are 2 basins with dozens of slips, with fixed docks in excellent shape, looking brand new.  The slips are large and the finger piers are long, giving access to the outermost pilings.  Orion Jr would be able to be centered in the slip to keep her away from the dock in large winds.  

Image description
With the next few days forecast to be windy, we took advantage of a calmer Saturday morning to move from the floating docks to our slip on the fixed piers in the east basin.  We pulled in beside a 60ft steel-hulled sailboat, Dave making his 2nd docking with Orion Jr, backing her into her home for the next few months.  He spent the rest of the day rigging lines to the various pilings.  Cathy had made additional chafe protection and Dave supplemented the standard dock lines with some “hurricane” lines that needed to be cut and spliced before deploying.  We had delayed stowing the dinghy, which Dave employed to get to the farthest pilings.
Cathy divided her attention between the inside and outside.  She had to clean and remove the enclosure and bimini and secure the supporting arches.  The compartments below had to be cleaned and anything flammable or perishable removed.  Anything of value or that we needed on Orion needed to be pulled out and staged to be loaded in the car when we picked it up on Monday.

By Tuesday, we were getting down to the wire.  We needed to start stowing things down below, which meant we weren’t spending another night on the boat.  By the time we were done, the dinghy, the smaller outboard, the solar panels, the bimini and enclosure were all stowed below and we had removed everything we think we need on Orion.  Dave rigged the small solar panel to keep the batteries charged and we declared her “done” and ready to leave.   

Image description
There was just one more thing.  We were concerned that we didn’t know anyone that we could ask to check on the boat while we were gone.  However, our next door neighbor, Robert, lives on his boat year-round with his cat (who was eager to explore our boat once we arrived) and was willing to help us by keeping an eye on her and giving us a call with any concerns.  That would give us peace of mind.  By around 4pm, we were in the car and underway, feeling we had done all we could for the little boat.  We were heading north toward Orion in Hampton.

Image description
Back on the Okeechobee Waterway

We left Fort Myers Beach early on a Wednesday morning, again trying to beat the power boat traffic, heading through Fort Myers and up the Caloosahatchie River toward LaBelle.  All was going smoothly until we approached the Franklin Lock.  When we had traveled through it westbound, the lock was on request.  However, when we called at 2pm to say we were 15 minutes out, we got the unfortunate news that the lock opened only on the odd hours.  This was because the lake levels are lower and the locks need to limit the outflow of water.  We had almost an hour to kill.  We throttled back and did large circles in the river waiting until 3pm.  These circles were made more difficult by the nearby Ranger training course where park rangers were weaving at high speeds in and out of buoys.  With relief we locked through at 3pm, alone except for the manatees who were also headed eastbound toward the Lake. 

We pulled into a slip at the park on the other side of the lock.  It was our first time on a dock since our last visit here almost 2 ½ months earlier.  Unlike our stay in January, we were accompanied by 7 other boats, most of them cruisers on their way to Glades or Turkey Creek to put their boats away for the summer. We spent some time with our neighbors who were interested in cruising advice on seeing the Chesapeake Bay.  Cathy pulled out the sewing machine and sat at the picnic table in the shelter sewing more chafe protection for our hurricane lines. 

The next day, we made a later start, using the morning hours to pull the dinghy over to the boat ramp and clean the bottom.  With winds and storms forecast for the afternoon, we were pushing to get through the 3 opening bridges as soon as possible and into LaBelle before conditions worsened.  The warmer weather was an eye-opener as the season brought out the alligators who were nowhere to be found in January.  Also, the citrus trees we passed were scenting the air with the sweet aroma of orange blossoms.  It was almost a completely different experience. 

On to Hampton

Taking 2 days to travel north, we arrived in Hampton only 1 day ahead of Pat and Fred, who had made a record run north on Marianna.  Cathy joined them for dinner, but unfortunately Dave had come down with a virus that took him out of commission for the day and he had to send his regrets.  After a weekend spent with the kids and grandkids, we’re now taking stock of Orion and finalizing her to put her on the market.  If you know of anyone who might be interested in a wonderful cruising boat, send them our way.  Orion could be the boat for them.