Published on
Image description
We are back in Hampton, but this time staying at the Public Piers for a couple of weeks.  We are working on Orion, helping out some fellow boaters, swimming and visiting with friends.  In the meantime, we follow the progress of Marianna as she makes her way south. 

Image description
Down the Bay

Orion was finally underway again after a month on Broad Creek, motoring in a light wind out of the Magothy River, through the Bay Bridge.  Having left the dock late, after 1:30, we had only a few options for ports for the night.  We decided to head for the West or Rhode Rivers, depending on which had the best protection. This turned out to be the Rhode River.  It was going to be a short stop, dropping anchor just before sunset and getting up a first light to head south to Solomons. 


What greeted us as we awoke the next morning was quite a surprise.  The night wasn’t as calm as we thought.  On top of the bimini, our solar panels were covered in pools of blood, feathers and animal parts.  There was blood dripping down the sides of the cockpit and running down the deck – and feathers everywhere.  We were at a loss to know what had happened.  We hadn’t heard anything. Using the deck washdown hose, we sprayed off some of the worst of the mess, but realized we would have to wait until we reached a dock in Solomons to really clean it off.  At least the inside of the cockpit was largely unaffected.  We can’t say as much for the poor bird on the losing end of that fight.

The rest of the trip to Solomons was cold and overcast, but uneventful.  We pulled onto the Spring Cove fuel dock shortly after 3pm, cleaned up, fueled up, pumped out and then headed back to anchor once again in Mill Creek.  The sun finally broke through shortly after setting anchor, which would be its last appearance for at least 36 hours.  We knew the forecast for the next day’s planned trip south of the Potomac was not pretty – rain likely all day – but at least the wind would not be too bad and it would be behind us, making for a much easier Potomac River crossing than the forecast for the rest of the week. 
Image description
Early the next morning, we put in all but one of the enclosure panels and began motoring out of Solomons back out to the Bay.  It was going to be a wet, messy trip.  But the weather was not going to be our only headache.  During our hourly engine checks, we began to notice a disturbing trend in the fuel vacuum pressure.  It was creeping up with each passing hour, meaning there was a blockage developing in the fuel line.  We were likely traveling on borrowed time.  Sure enough, around 10am, the engine sputtered like it was going to shut off.  Cathy ran down and switched to our other Racor filter.  Unfortunately, the pressure remained high.  When Dave went down to check out the situation, he saw the Racor bowls were not staying full.  He tried re-filling them, but the level wouldn’t stay up.  So, we pulled out the sails and killed the engine. Dave had already placed a call to Deltaville when he had seen the pressure rising.  He wanted to talk to Matt or Jon, before doing much more with the fuel line.  In the meantime, the winds were allowing us to make reasonable progress.  

We had been hoping to visit Indian Creek to see Joy and Rusty on Slow Dancin’.  However, we weren’t sure what the wind would allow us to do.  Just before we reached Smith Point at the southern edge of the Potomac, Dave got a call from Jon at Deltaville.  After talking through the symptoms, they decided the problem was likely a blockage in the fuel line before the Racor filters.  If that was the case, it might be possible to clear it by blowing through the hose.  Dave first tried to clear it by blowing toward the Racor filter.  Nothing happened.  So, he tried blowing back toward the fuel tank.  After a couple of tries, he heard a distinctive “pop”.  He could tell the line had cleared.  After re-connecting the fuel lines and topping off the Racor bowls, we re-started the engine.  The fuel vacuum pressure had dropped back to an acceptable level.  We called Joy and Rusty and told them we would see them as planned.  They met us in the rain, as we pulled onto the dock shortly after 4pm.

With winds forecasted to gust to 30 from the southwest the next day, we arranged to spend 2 nights on the dock at the Indian Creek Yacht Club as guests of Rusty and Joy.  This gave us a couple of days to visit with them and enjoy their hospitality.  They are working to prepare Slow Dancin’ for another trip south, with a planned departure in early November.  We compared notes on different boat projects and offered a little assistance with some.  But we were trying to get to hook up with Steve on Bay Dreamer for the weekend, so we needed to move on, and headed out early Friday morning. 
Image description
In sharp contrast to the preceding days’ travel, Friday was sunny and warmer.  We pulled out the sails soon after leaving Indian Creek and sailed south until we had to turn into Mobjack Bay.  As we rounded New Point Comfort to head northwest into the East River, our angle into the wind was too tight to sail, so we motored the last few miles to the anchorage.  We rejected the popular Put-in Creek anchorage due to the crab pots and chose a protected bend in the East River, next to a couple of rafted boats.  We stayed a couple of nights, but since Steve was still having some transmission problems, we didn’t hook up as planned.  Instead we used the time to get some boat work done. 
Image description
When we decided to take a break and explore Put-in Creek by dinghy, we were surprised to find 2 new neighbors in the anchorage upon our return.  That’s how we got to meet Bob and Marilyn on Peaceful Easy Feeling, a Beneteau 473 (one beautiful boat).  We followed them back to Hampton on Sunday, but with their boat under full sail, they quickly disappeared over the horizon.  We learned later that despite their record time down the Bay, we managed to take our slip at the Hampton Public Piers long before they made theirs in Salt Ponds.  The full moon tide was lower than normal and they ran aground on a falling tide in the already shallow entrance.  It wasn’t till 7:30pm before they could free themselves.

So, we settled in at the Hampton Public Piers and started working on a list of boat projects and trips that would fill our time while we waited for Marianna and Quicksilver to arrive from points north.
Image description
Boat Stuff

While in the East River, with the beautiful weather and the dinghy in the water, Dave used the time to clean the water line and wax the hull.  We used lemon juice for the waterline, which was kinder to the environment and to our bottom paint and seemed almost as effective as the more caustic alternative.  Cathy spent her time on the upper deck, polishing the rest of the stainless steel and waxing the foreward part of the upper deck that is normally blocked by the dinghy.   The main reason for launching the dinghy was to allow Dave to check out his fuel line fix on the outboard (which worked well) and to run the gas out of the dinghy, since it doesn’t age well. 
Image description
Once we arrived in Hampton, the list of projects grew.  Cathy took advantage of several days of good weather and time on the dock to strip and re-Cetol the cockpit seats and the toe rails with Cetol Natural Teak, so that they will match the swim platform and the port caprail.  The several days effort paid dividends in a beautiful new finish.  Before re-mounting the dinghy, we covered the newly-refinished toe-rails with foam pipe insulation to keep the rails looking good.

In the meantime, Dave worked out a way to implement a temporary solution to our fuel blockage that would keep us running if it happened again.  He purchased some fuel line that could attach to the Racor filters and run into a 5 gallon diesel jug.   This would keep Orion going for almost 10 hours in an emergency.  

Taking Time Out
One of the main reasons we wanted to get back to Hampton was to spend Halloween with the grandkids at the Virginia Air and Space Center.  However, we had difficulty finding a slip for the weekend until the very last minute.  So, instead we went to visit the grandkids in Richmond and Jarratt on Halloween weekend.  It was amazing how much they change in just a few weeks, especially the littlest ones.  

Of course, being back in Hampton meant we could go back to the Community Center for swimming, visit with our friends at Joy’s Marina and enjoy the downtown happenings, such as a Halloween party with a great band and lots of interesting costumes.  Also, with all the boats in and out of the Public Piers heading south, we enjoyed time with some new friends, such as Scott and Lisa on Messenger, who were taking their first trip south.  We helped point out some of the things to look for and some to avoid as they made the journey. 

As our friends get closer, we are keeping busy, but looking forward to getting back together for the trip south.  Hopefully, our next update will have us on our way.
Published on
Image description
We spent the first half of October on the dock in Broad Creek, off the Magothy River, north of Annapolis, visiting some more with Gail and George of Quicksilver, who were preparing their boat to take a trip south this winter, after a 4 year hiatus.  We had originally planned to leave for Annapolis shortly after returning from Rochester and Reston.  After talking through all the boat projects needed onGeorge and Gail’s boat, we offered to stay longer to help them.  A little over 2 weeks later, we were ready to head south again.

Quicksilver’s Projects

It took over 2 weeks of work, but Dave and George managed to finish almost all of the items on the laundry list needed to get Quicksilver ready to go.  This included some significant items, such as completely replacing the AC wiring, grounding the DC circuit, installing fuses, re-plumbing the fuel line, mounting new bow and stern lights, and installing new LED cabin lights.  There were some agonizing moments --  such as when the ignition switch failed and the engine wouldn’t start or when the watermaker wouldn’t work – that made it feel like the list was getting longer instead of shorter.  However, by the end of stay, all major work was done and the systems were all working.  

George was feeling pretty good about leaving for a planned weeklong vacation, as our stay with them came to an end, much more confident that Quicksilver would be ready to cast off shortly after their return. 
Image description
Up on the Rooftop

the past 2 ½ years, we had been tying down our 4 flexible solar panels in their “temporary” location on the foredeck and on top of the dinghy.  This didn’t look the best and frequently got in the way of launching the dinghy, opening hatches and just moving about on deck.  So, with the extended time at George and Gail’s dock and the access to George’s Sailrite sewing machine, we decided to work on the more permanent solution to securing these panels.  We had always wanted them on top of the bimini.  This would put them out of the way and give them maximum, shadow-free exposure to the sun.  The question was: how to do it?  We talked through the options and what Cathy was able to execute with the supplies and sewing skills she had.  The solution chosen was to attach straps with Velcro hook to the solar panels and Velcro loop strips onto the bimini.  While the bimini was off the boat, Cathy also re-stitched some worn seams and added a new “channel” to allow the solar panel wires to run back through the cockpit to the companionway, but still out of the way of our movement in the cockpit.


Image description
With the modifications made, we re-mounted the bimini, attached the solar panels, and then Dave re-wired the panel connections to make them more permanent and to allow each panel to be removed individually, if it became necessary.  The new configuration looked good, much neater than before, and we kept our fingers crossed for them to stay put in high winds.  We didn’t have to wait long for the test.

 

The night after putting the panels in place, a classic Chesapeake thunderstorm moved through as a cold front approached.  Holding nothing back, the wind began to toss Orion around, shortly after the rain began to fall.  Cathy threw on her raincoat and scurried up on deck to see what had happened to the solar panels.  Not good news.  The starboard pair had slipped off and were hanging over the lifelines, secured only by a cable tie.   She grabbed them and called for Dave to help bring them down to weather the storm.   

Given all the work to sew all the straps and Velcro, Cathy was at a loss to suggest a fix for the problem.  After some more thought, Dave decided that we needed to help secure them with some line.  He tied them down to the bimini supports and we’ve had no problems since.  Let’s hope they stay put from now on.

Image description
One side effect of getting such a close look at the bimini for this project was a re-examination of the rest of the enclosure.  Sure enough, although a cursory glance revealed no problems, it didn’t take much more than picking at the stitches with a finger nail to see that they were close to failure.  Three years of constant exposure to the sun had taken their inevitable toll.  So, Cathy took each of the 13 panels off and re-stitched them as well.  Presumably, they’re good for another season or two.
Image description
Powering Up - Again

As we left the Bahamas at the end of March, our inverter failed, causing us to return it for a replacement under warranty.  We were treated very well by the company, whose representatives ended up sending us 2 different inverters, although both were not exactly what we needed.  So, we sold these and replaced them with a new 1200W inverter from Vector.  However, it wasn’t going to be as simple as disconnecting the old inverter and connecting the new one.  Since the new unit’s dimensions differed from the one it replaced, Dave needed to find a new board to mount it on and seal the wood before mounting it on the engine room wall.  A bigger deal was the fact that the connections were different, so the original wires had to be replaced with new ones.  Given the heavy wire, Dave needed to get some help crimping on the connections required.  He was finally able to get help with this from Steven’s Battery Warehouse while we were in Pasadena.
                                                                   

So, we had the unit mounted and the wires with the right connectors.  It should be a simple install, right?  Well, maybe not. 

As Dave was connecting the last of the wires, which happened to be the ground, the post on the inverter broke.  To say he was upset would be an understatement.  After opening up the back of the inverter to see how the ground post was connected, it appeared a relative easy fix.  The grounding wire inside had a ring terminal that could simply be attached to the right size bolt.  So, we found one in our supplies, along with the necessary nuts and washers, turning what appeared to be a disaster into a relatively easy fix.  Dave powered the unit up, we plugged in a light and – Voila – it worked. 

So, we won’t have to go without ice and blended drinks this winter.  Isn’t that great?

Other Boat Stuff

-          In the process of working with George on Quicksilver, Dave helped to add fuses to the battery connections, per a recommendation in his survey.  In thinking this through with George, he decided it was a good idea to do the same on Orion.  So he ordered some fuse holders and inserted them in all the positive wires leading from the battery.

-          Cathy took advantage of the cooler weather and some sunny days to refresh the Cetol on the port caprail and the swim platform.

-          Dave once again sealed the cracks in the box that houses the generator.

-          Piggybacking on another recommendation from George, we got two of our fire extinguishers inspected and tagged to reflect this.
Image description
Annapolis Boat Show

After having skipped last year’s Boat Show, we were looking forward to checking it out again this year.  We had a new list of things we were looking for, but nothing major.  One item that was not on our list was a sea drogue.  (This is something like a parachute that you drag behind the boat in heavy seas to keep the bow into the waves.)  However, we stumbled across a vendor selling one for an incredible price.  There were two versions: one with a point of attachment for a float and one without.  We decided to buy the one without the attachment point.  Cathy later sewed some webbing onto the drogue to enable a float to be added before it would be deployed.  Now, let’s hope we never use it.
Image description
Susan from Daisy Sue stopped by on her way north to join us for the Boat Show.  She found a few things for her boat, including the lettering for her new name.

Image description
Birthday Girl
We had planned to move Orion south to Solomons the weekend of Cathy’s birthday.  However, the weather gods didn’t cooperate.  Since we still wanted to visit Don and Cindy and the kids, we rented a car and drove south.  We had a wonderful visit with them, enjoying a fall picnic and bonfire, pumpkin picking and a walk on the beach at Point Lookout on a beautiful fall weekend.  It was a great way to spend a birthday. 

Now, we just need to bring Orion back this way.