- Published on
This update finds us anchored within only a couple of miles of where we left off in mid-June (which was Mill Creek). We are anchored near Sandy Point on the Great Wicomico, south of Reedville, VA. (By the way, the original Chesapeake Bay inhabitants were not a creative lot, so there are lots of Mill Creeks and Back Creeks, to mention just a few of the repeated names.) In the intervening 2 weeks we’ve traveled over 150 miles in 4 hops, down to Yorktown and back. It’s been a mix of anchoring and tying up at marinas. The Chesapeake summer heat and humidity have arrived earlier than we had hoped. However, we’ve had a number of cooler nights as well.
Hooking up
We’re getting better at the process of anchoring, doing well enough to anchor in 20+ mph winds and finally confident enough to leave the boat at anchor while dinghying (is that a word?) to a nearby marina store.
Setting anchor is becoming less eventful, but not stress-free. We’ve nearly run aground, had to reset the anchor multiple times per anchorage, and had a few “communication” problems between the bow anchor-setter (David) and the helm (Cathy). However, the anchor has always set and held, which is what is important for a restful night. David is continuing to work on an effective snubber line (which buffers the boat from the jerking movement of the anchor chain). The original set-up, with chain hooks through the anchor chain, frequently came loose and had to be re-set. Upon advice from more experienced cruisers, he tried simply tying the line into the chain, but the diameter of the line made this difficult and began fraying the ends. At an amazingly well-supplied marine store at York River Yacht Haven on Sarah Creek near Yorktown, he finally found a chain bridle, a metal plate with a slot in the middle and 2 holes on either side. The chain links fit into a slot in the middle and then, using shackles in each hole, he can attach 2 snubber lines, run from the port and starboard bow cleats. This will balance the load of the anchor chain in front of the boat.
Another concern about anchor chain is ensuring it doesn’t slip and put strain on the windlass. To avoid this, David has been inserting a bolt through the chain, attaching it to the anchor mount at the bow. However, since we couldn’t find a quick release bolt, this can become dangerous if we need to quickly release or retrieve the anchor chain. A friend we met from England suggested a much better solution, to attach a line with a chain hook to the chain on the bow, making for a much safer, easier to release solution.
Power hungry
Amazingly, our power consumption has been far less at anchorage than original expected. We are only using 60-75 amps per night of anchoring. The most time we’ve spent at anchor between hooking up to electric at a marina is 4 nights, which means we’ve not consumed enough of the batteries to require recharging. So, our generator sits idly in its box on deck, unused so far. (Cathy has even indulged in running fans on board for brief periods, despite David’s objections.)
Baby, you can drive my car . . .
As any cruiser will tell you, our dinghy is effectively our car, while we are at anchor. Without it, you can enjoy the peaceful breezes (if there are any) , read a book, enjoy the scenery, but you are limited to the 36 feet of your boat. We finally pumped it up again and mounted the motor on it to explore Fishing Bay, and then later, Sarah Creek, docking at the marina there. Both David and Cathy have taken turns “driving”.
Blowin’ in the Wind
After receiving our anemometer (wind speed measurement) back from Raymarine, Cathy re-mounted it on the masthead, and, voilá!, we had wind speed at the helm. (Wow! A trip up the mast that actually fixed something.) Unfortunately, the day before, the boat speed indicator had stopped working, so many of the cool calculations of true wind speed and velocity made good (whatever that is) weren’t available.
It’s always something.
We had recently cleaned the speedometer, so the likelihood was that the problem was on the outside of the hull. Going up the mast was one thing. Going under the boat was another. Neither David or Cathy was going to be a reluctant volunteer to hold their breath in murky water under a several ton boat and hope to find the problem with the thru hull. But this time, we got extremely lucky. We pulled into Fishing Bay Harbor Marina for a less than 24-hour pit stop to re-supply. Cathy called Under Boats (www.underboats.com), a diver recommended by the marina, on the slim chance that they might be able to dive under the boat and clean the speed thru hull. To our amazement, they were able to come and dive on the boat that afternoon. Apparently, we were incredibly lucky, since they were diving on a boat on the same dock already, and they are normally only in Deltaville one week a month. Chuck Hyde, the diver, cleaned the thru hull and the rest of the running gear of the barnacles that had unfortunately accumulated in the last month and a half in the water. However, he did confirm that the hull itself was very clean, meaning our paint job was working as we had hoped. Before he left, Chuck ensured we could verify the speed indicator was working, allowing us to play with the wind instrument’s fancier calculations, pondering the difference between true and apparent wind speed, during our sail the next day. The job also cost us much less than we had paid in Annapolis last year. Since our zinc is about 2 months from being exhausted, and since the barnacles accumulated on the prop faster than expected, we will likely be calling Under Boats again before the summer is over.
Sitting at the Dock of the Bay
Despite the merits of anchoring, there is nothing like pulling into a marina and enjoying a brief bit of civilization (aka air conditioning and showers). We’ve enjoyed the comforts of 3 marinas on our way to Yorktown and back, all of which we’d visit again.
Fishing Bay Harbor is off the Piankatank River, just south of Deltaville. Words can’t describe the pleasure of slipping into the cool waters of their pool after the heat of the summer day. They have nice bikes with large baskets available for use by the slipholders. With Deltaville about a mile away, this is a tremendous convenience for picking up groceries, boat supplies (at Boat US across the street from the grocery) and doing some banking at the local BBT branch. With the laundry next to the pool, it’s easy to feel “productive” while cooling off. There’s also a nice covered patio to use their wireless internet connection to stay in touch. This is the life!
In Sarah Creek, off the York River across from Yorktown, there is the York River Yacht Haven, which as mentioned above, has the most amazing marine store. It had a number of parts that David had looked for in several West Marine stores and Fawcett’s in Annapolis, without finding them. The staff was very helpful in meeting both our needs and those of some fellow boaters who were anchoring nearby, from England. The marina’s courtesy car saved both us and our British friends from getting drenched on a grocery run, during an hours long thunderstorm that knocked power out and flooded nearby communities. Although we didn’t sample the fare, the smells coming from the on-site restaurant made us wish we had. Cathy was able to relax with a good book on the pool patio again while doing laundry. (The Sarah Creek area is a little shallow, however. Cathy was a little panicked when docking at low tide to see the depth at the slip register 4 feet. (We have a 5’ 5” draft.) Since we didn’t run aground, we now know that the depth sounder is at least 1 ½ foot below the water line. It’s still a little too close for comfort.)
Hooking up
We’re getting better at the process of anchoring, doing well enough to anchor in 20+ mph winds and finally confident enough to leave the boat at anchor while dinghying (is that a word?) to a nearby marina store.
Setting anchor is becoming less eventful, but not stress-free. We’ve nearly run aground, had to reset the anchor multiple times per anchorage, and had a few “communication” problems between the bow anchor-setter (David) and the helm (Cathy). However, the anchor has always set and held, which is what is important for a restful night. David is continuing to work on an effective snubber line (which buffers the boat from the jerking movement of the anchor chain). The original set-up, with chain hooks through the anchor chain, frequently came loose and had to be re-set. Upon advice from more experienced cruisers, he tried simply tying the line into the chain, but the diameter of the line made this difficult and began fraying the ends. At an amazingly well-supplied marine store at York River Yacht Haven on Sarah Creek near Yorktown, he finally found a chain bridle, a metal plate with a slot in the middle and 2 holes on either side. The chain links fit into a slot in the middle and then, using shackles in each hole, he can attach 2 snubber lines, run from the port and starboard bow cleats. This will balance the load of the anchor chain in front of the boat.
Another concern about anchor chain is ensuring it doesn’t slip and put strain on the windlass. To avoid this, David has been inserting a bolt through the chain, attaching it to the anchor mount at the bow. However, since we couldn’t find a quick release bolt, this can become dangerous if we need to quickly release or retrieve the anchor chain. A friend we met from England suggested a much better solution, to attach a line with a chain hook to the chain on the bow, making for a much safer, easier to release solution.
Power hungry
Amazingly, our power consumption has been far less at anchorage than original expected. We are only using 60-75 amps per night of anchoring. The most time we’ve spent at anchor between hooking up to electric at a marina is 4 nights, which means we’ve not consumed enough of the batteries to require recharging. So, our generator sits idly in its box on deck, unused so far. (Cathy has even indulged in running fans on board for brief periods, despite David’s objections.)
Baby, you can drive my car . . .
As any cruiser will tell you, our dinghy is effectively our car, while we are at anchor. Without it, you can enjoy the peaceful breezes (if there are any) , read a book, enjoy the scenery, but you are limited to the 36 feet of your boat. We finally pumped it up again and mounted the motor on it to explore Fishing Bay, and then later, Sarah Creek, docking at the marina there. Both David and Cathy have taken turns “driving”.
Blowin’ in the Wind
After receiving our anemometer (wind speed measurement) back from Raymarine, Cathy re-mounted it on the masthead, and, voilá!, we had wind speed at the helm. (Wow! A trip up the mast that actually fixed something.) Unfortunately, the day before, the boat speed indicator had stopped working, so many of the cool calculations of true wind speed and velocity made good (whatever that is) weren’t available.
It’s always something.
We had recently cleaned the speedometer, so the likelihood was that the problem was on the outside of the hull. Going up the mast was one thing. Going under the boat was another. Neither David or Cathy was going to be a reluctant volunteer to hold their breath in murky water under a several ton boat and hope to find the problem with the thru hull. But this time, we got extremely lucky. We pulled into Fishing Bay Harbor Marina for a less than 24-hour pit stop to re-supply. Cathy called Under Boats (www.underboats.com), a diver recommended by the marina, on the slim chance that they might be able to dive under the boat and clean the speed thru hull. To our amazement, they were able to come and dive on the boat that afternoon. Apparently, we were incredibly lucky, since they were diving on a boat on the same dock already, and they are normally only in Deltaville one week a month. Chuck Hyde, the diver, cleaned the thru hull and the rest of the running gear of the barnacles that had unfortunately accumulated in the last month and a half in the water. However, he did confirm that the hull itself was very clean, meaning our paint job was working as we had hoped. Before he left, Chuck ensured we could verify the speed indicator was working, allowing us to play with the wind instrument’s fancier calculations, pondering the difference between true and apparent wind speed, during our sail the next day. The job also cost us much less than we had paid in Annapolis last year. Since our zinc is about 2 months from being exhausted, and since the barnacles accumulated on the prop faster than expected, we will likely be calling Under Boats again before the summer is over.
Sitting at the Dock of the Bay
Despite the merits of anchoring, there is nothing like pulling into a marina and enjoying a brief bit of civilization (aka air conditioning and showers). We’ve enjoyed the comforts of 3 marinas on our way to Yorktown and back, all of which we’d visit again.
Fishing Bay Harbor is off the Piankatank River, just south of Deltaville. Words can’t describe the pleasure of slipping into the cool waters of their pool after the heat of the summer day. They have nice bikes with large baskets available for use by the slipholders. With Deltaville about a mile away, this is a tremendous convenience for picking up groceries, boat supplies (at Boat US across the street from the grocery) and doing some banking at the local BBT branch. With the laundry next to the pool, it’s easy to feel “productive” while cooling off. There’s also a nice covered patio to use their wireless internet connection to stay in touch. This is the life!
In Sarah Creek, off the York River across from Yorktown, there is the York River Yacht Haven, which as mentioned above, has the most amazing marine store. It had a number of parts that David had looked for in several West Marine stores and Fawcett’s in Annapolis, without finding them. The staff was very helpful in meeting both our needs and those of some fellow boaters who were anchoring nearby, from England. The marina’s courtesy car saved both us and our British friends from getting drenched on a grocery run, during an hours long thunderstorm that knocked power out and flooded nearby communities. Although we didn’t sample the fare, the smells coming from the on-site restaurant made us wish we had. Cathy was able to relax with a good book on the pool patio again while doing laundry. (The Sarah Creek area is a little shallow, however. Cathy was a little panicked when docking at low tide to see the depth at the slip register 4 feet. (We have a 5’ 5” draft.) Since we didn’t run aground, we now know that the depth sounder is at least 1 ½ foot below the water line. It’s still a little too close for comfort.)
Right on the York River in Yorktown, the town’s Riverwalk Landing has a county-run transient pier. Situated right in the historic area of Yorktown, the National Park sites are all within walking distance. We probably definitely chose the wrong 2 nights to stay at the marina, based on the weather we experienced. Furious winds and endless rains churned up the York River’s normal 2 knot current to some pretty intense wave action, even inside the marina’s floating docks. However, the staff couldn’t have been more helpful. The dockmaster, Dennis, gave us helpful docking instruction and ensured we were given a slip that was easy to enter and leave. His deck hand, Sam, even drove us to the nearby grocery store in his car. Nothing like personalized service.
You’ve Got a Friend
We’ve had time to visit with family and meet new friends in the last 2 weeks.
As promised, our daughter Bonnie and her fiancé Troy, joined us for a day of fishing. Given our limited skills, we just anchored in Sarah Creek, but all of us (except David, who was focusing on baiting hooks, not fishing) caught at least one fish – croakers, whose name is well earned by the noise they make. Of course, Troy caught half a dozen to the one for Bonnie and Cathy. It will still take some time for the rest of us to catch us with Troy’s skill.
While at Fishing Bay Harbor, a couple from Vermont, who had been cruising for 7 years gave David anchoring advice (including loan of a book on anchoring), giving him enough confidence to anchor out the next night in those 20mph winds. They were also our first on board guests to arrive by dinghy. We watch in amazement as they rode from shore to boat all day in high winds and waves, carrying things to and from shore. One trip included 2 full size bicycles. They tied up to our boat and joined us from some wine / beer and cheese and conversation.
We struck an unexpected friendship with a father and son from Lowestoft, England. Our first evening in Sarah Creek had been a particularly difficult anchoring experience for us, due to the shallow water in the creek and our inexperience doing it. When a boat pulled up uncomfortably close beside us, David called over to ensure they were aware of our anchor position. They called back that they would come over to see us and ensure we were OK. That was how we got to meet Richard and his son, Tom, aboard Green Dragon. Over the next week, we spent part of each day with them, trying to help each other out as we could. Richard had sailed a Beneteau from the West Indies to England many years back and was planning another cross-Atlantic trip next year in the 80’s vintage Hunter he had just purchased. Richard took possession of Green Dragon in Chicago in late April. He had then sailed it through the Great Lakes and, with mast down, powered through the Erie (Barge) Canal. Tom joined him to take the boat down the Hudson to New York City, Ocean City and then into the bay at Norfolk. We heard them describe a powerful storm that they sailed through off Ocean City (max winds 46 knots). With an amazing set-up, including remote auto-pilot, radar and GPS, Richard sailed the boat from below through the worst of the storm. (As a result of this description, we’ve added a few more things to our “need to buy” list as a result. We’ve managed to avoid sailing or even anchoring in some very violent Chesapeake thunderstorms in the past few weeks.) In another hilarious turn, Richard talked about waking up at 6am the morning after the storm to warnings from the Navy that they were about to start “live fire” exercises just ahead of him on his route. He said sailing was the easiest part of his journey. Dodging storms and bullets were the hard part. While Richard was planning to return to England soon after we met them, Tom would be joined by his girlfriend and would sail the boat throughout the bay for next month. We exchanged information about the bay, how to arrange travel for Richard and Tom’s girlfriend, shared rides to the grocery, dinners on the boat and evening refreshments. In exchange, Richard provided invaluable advice on anchoring and sailing, and twice assisted Cathy at the helm in getting into a tricky slip at the nearby marina. We said goodbye late one evening before Richard was scheduled to return home, thinking the odds were that we might never see them again. To our surprise, we looked up to see Green Dragon with Tom and Mo (his girlfriend) on board, at our new anchorage in Fishing Bay, 40 miles north of Yorktown. It’s a small bay.
You’ve Got a Friend
We’ve had time to visit with family and meet new friends in the last 2 weeks.
As promised, our daughter Bonnie and her fiancé Troy, joined us for a day of fishing. Given our limited skills, we just anchored in Sarah Creek, but all of us (except David, who was focusing on baiting hooks, not fishing) caught at least one fish – croakers, whose name is well earned by the noise they make. Of course, Troy caught half a dozen to the one for Bonnie and Cathy. It will still take some time for the rest of us to catch us with Troy’s skill.
While at Fishing Bay Harbor, a couple from Vermont, who had been cruising for 7 years gave David anchoring advice (including loan of a book on anchoring), giving him enough confidence to anchor out the next night in those 20mph winds. They were also our first on board guests to arrive by dinghy. We watch in amazement as they rode from shore to boat all day in high winds and waves, carrying things to and from shore. One trip included 2 full size bicycles. They tied up to our boat and joined us from some wine / beer and cheese and conversation.
We struck an unexpected friendship with a father and son from Lowestoft, England. Our first evening in Sarah Creek had been a particularly difficult anchoring experience for us, due to the shallow water in the creek and our inexperience doing it. When a boat pulled up uncomfortably close beside us, David called over to ensure they were aware of our anchor position. They called back that they would come over to see us and ensure we were OK. That was how we got to meet Richard and his son, Tom, aboard Green Dragon. Over the next week, we spent part of each day with them, trying to help each other out as we could. Richard had sailed a Beneteau from the West Indies to England many years back and was planning another cross-Atlantic trip next year in the 80’s vintage Hunter he had just purchased. Richard took possession of Green Dragon in Chicago in late April. He had then sailed it through the Great Lakes and, with mast down, powered through the Erie (Barge) Canal. Tom joined him to take the boat down the Hudson to New York City, Ocean City and then into the bay at Norfolk. We heard them describe a powerful storm that they sailed through off Ocean City (max winds 46 knots). With an amazing set-up, including remote auto-pilot, radar and GPS, Richard sailed the boat from below through the worst of the storm. (As a result of this description, we’ve added a few more things to our “need to buy” list as a result. We’ve managed to avoid sailing or even anchoring in some very violent Chesapeake thunderstorms in the past few weeks.) In another hilarious turn, Richard talked about waking up at 6am the morning after the storm to warnings from the Navy that they were about to start “live fire” exercises just ahead of him on his route. He said sailing was the easiest part of his journey. Dodging storms and bullets were the hard part. While Richard was planning to return to England soon after we met them, Tom would be joined by his girlfriend and would sail the boat throughout the bay for next month. We exchanged information about the bay, how to arrange travel for Richard and Tom’s girlfriend, shared rides to the grocery, dinners on the boat and evening refreshments. In exchange, Richard provided invaluable advice on anchoring and sailing, and twice assisted Cathy at the helm in getting into a tricky slip at the nearby marina. We said goodbye late one evening before Richard was scheduled to return home, thinking the odds were that we might never see them again. To our surprise, we looked up to see Green Dragon with Tom and Mo (his girlfriend) on board, at our new anchorage in Fishing Bay, 40 miles north of Yorktown. It’s a small bay.
We are now on our way to Solomon’s to meet our former neighbors, Chris and Margaret for a night out anchoring in the Patuxent. Then, it’s further north in the bay. Who knows, maybe we’ll see Green Dragon again . . .
- Published on
Well, we finally did it. We cut the lines, so to speak, and left our last “home” slip for parts unknown. (Although still limited to the Chesapeake Bay, so they’re not that unknown.) The frantic pace slowed only a little as we neared the last day, and the marina manager graciously gave us a couple of extra days to finish as much of the “list” as we could before we left.
Anchors Aweigh!
Since our general plan has been that we would spend a majority of nights at anchor, we still needed to confirm that all the pieces of the anchoring puzzle were in place and would fit together as expected. This involves not only the anchoring process itself, but also a reliable source of electricity and water.
Although David had purchased the new Delta 35 anchor and 130 feet of chain rode back in March, we hadn’t attached the chain rode to the anchor, because we needed to first mark the rode in standard lengths to allow us to know how much had been deployed. After researching a number of alternatives, we finally went with the recommendation to paint the chain lengths with Rustoleum, using a technique of painting 1 chain link per ten feet deployed (e.g. at 10’, 1 link, at 20’, 2 links, etc.). Since the paint required 24 hours to dry, we once again took advantage of Don’s hospitality and spread the chain out in his back yard to paint and let dry. (We didn’t think the marina would want this all over their transient dock for a couple of days.) All chain rodes also require something called a “snubber”, which keeps the boat from jerking on the inelastic chain. A snubber is nothing more than a piece of nylon rope with a thimble and chain hook in one end, which is hooked through a link of the chain and then cleated. David made 2 of these to ensure we had a spare.
With the anchor taken care of, the next piece was ensuring we could recharge our batteries when anchored several days. We needed to test the generator and the newly installed 55amp Iota Battery charger. This would have been simple enough, except we couldn’t find a waterproof box to house the generator on deck. (Since, once we put gas in it, we no longer could keep it down below.) After looking high and low, we stumbled across a deck box at an Annapolis consignment store, Bacon and Associates. Amazingly, it was exactly the right size for the generator and 2 small cans of gas. With the box safely lashed to the deck, we fired up the generator, connected it to the battery charger, and both worked exactly as expected. A first! The new battery monitor also nicely confirmed the charger was delivering the output expected.
The last thing we had to confirm was that we could drink water from our freshly scrubbed tanks. Since it didn’t make sense to continue buying bottled water, but since we were both waiting for the other to be the first to drink, we were gradually getting dehydrated in this game of chicken. Finally, push came to shove. Since Cathy is always pushing the limits on foods (e.g. eating things past expiration dates, etc.), she drank the first glass. David watched carefully for 24 hours. When she didn’t seem to be too ill, he finally drank a glass too. We haven’t turned green or anything, and we’ve been drinking it for several weeks now. Phew! (We do continue to filter all water going into the tank, we add chlorine to the tank and, our last defense, we have a PUR water filter on the galley sink.)
Up the mast . . . again
As you may recall, the last trip up the mast was particularly unsuccessful in resolving our anemometer (wind speed) problem. After exchanging some e-mails with Raymarine, it became apparent that we had to return the masthead unit to them for servicing. So, Cathy took another trip up the mast. (She’s getting much better at it. David says he’ll go next time.) Raymarine repaired the part, but couldn’t get it back to us before we had to leave Solomons. It has since arrived at our daughter’s house, so David should be able to mount it again once we connect with Bonnie and Troy for a fishing trip the last weekend in June.
Rope tricks
We had purchased 200 feet of braided line for one of our many anchors, the Danforth S1600. However, it needed a thimble inserted in the end to attach to the anchor shackle. David had been putting his Boy Scout skills to work splicing a number of three-stand nylon ropes, but he had never spliced braided line. Margaret, our neighbor in Solomons, graciously taught us both how to do this and lent her tools (called fids) that are necessary for this type of splice. We successfully put an eye splice in not only the anchor line, but also a new spare halyard we plan to run to the top of the mast. (Something else David will be carrying up there on his first trip. Right?) Also, David shared his 3-strand splicing techniques with Margaret, which she had never done before.
Shopping trips
It seems there is no end to the number of “little” things that are needed before you set sail. We made more trips to local Boaters World, West Marine, Lowes, and Wal-mart to keep buying (and returning) items for the various projects we’ve been trying to finish. We also made a very productive trip to Bacon and Associates, a consignment store in Annapolis. We managed to pick up 2 folding bikes, the deck box, and a number of smaller items for less than $200. David also received an early Father’s Day present, when Bonnie and her fiancé, Troy, took him shopping for a fishing rod and reel and related supplies. (That’s why we’re meeting them to go fishing, so Troy can teach us how to use it.) On the recommendation of other sailors, we decided to buy another anchor. This was a small 14 lb. Danforth S12, which is now our stern anchor. This will be used as a “brake” for emergencies or to kedge off (i.e., pull ourselves off when we run aground).
Sail Trim 101
We had a few more opportunities to go out sailing with Don, who showed us a number of things we hadn’t been doing which would get more speed out of the sails, especially in lighter winds, which are common on the Chesapeake in summer. This came in handy on our 2 long days of sailing across the bay to the Eastern shore and back in light winds after we left Solomons.
Goodbyes
It’s hard to believe that just a month spent at the marina could generate attachments that made the departure harder to do. Our neighbors, Chris and Margaret, had become friends that we had shared experiences and laughs with. As we mentioned above, Margaret and David exchanged splicing techniques and we helped with dog sitting on one day in exchange for a ride to return our rental car the next day. Also, we watched them return from a harrowing weekend trip to Dunn's Cove on the Choptank, which became instead a very long day trip, when their anchor started dragging as they were on the shore, not on the boat. After they rushed back and caught the boat (which had drifted enough that another boat had to move to avoid it), they were unable to haul their anchor back on board, so they had to cut the rode and leave it at the bottom of Dun Cove. Unfortunately, without another anchor, they had to have a slip for the night, which meant another 10 miles up the Choptank or back to the safety of their own slip in Hospitality Harbor. Home seemed the better choice. As they came back in the Patuxent after dark (first time night sailing for both), they realized that the Solomon’s channel markers are not lit. With a flashlight and their GPS hooked to charts on the PC, they navigated back in, exhausted, after 10pm. We helped them with their dock lines and listened to the story of their day. As the winds howled the next day, they decided it was fate that they came back early, but they spent quite a while talking to David about anchors (one of his favorite subjects) and researching alternatives. We suggested this would be a great Voice of Experience episode for Sail Magazine. (We hope we didn’t spoil it for them by including it here.) It was this experience that caused David to make sure we had bolt cutters (in case we had to sever our anchor chain) and a trip line (float attached to a line on the anchor) so we could be sure of the position of our anchor once it was set.
Where to?
All of our focus had been concentrated on boat mechanics at the expense of any trip planning. When we finally turned our attention to this, we had to make a basic decision. North or South? We finally decided to go south so we could meet up with Bonnie and Troy. Our first stop was across the bay to Crisfield, MD on the Eastern Shore. Crisfield is about as far south as you can go and stay in MD. The marina there, Somers Cove, was recommended by the guide book we were reading, and they had a buy 2 nights, get one free offer that we took them up on. This proved a good choice, since it poured the first day and the winds were gusting above 25 knots the 2nd day. We took the opportunity to tour Crisfield one day (we had a personalized trolley tour) and visit Smith Island the next (by mail boat). It was a great first stop. The towns folk were very friendly and the marina was very nice. Smith Island was beautiful. After seeing the village, we sampled some 9-layer Smith Island cake and a delicious crabcake at Ruke’s, from their porch overlooking the harbor. Friday took us back to the Western shore and anchoring in Mill Creek. (We finally put all that preparation to good use.)
We’ll continue to work our way south for another week, and then probably head back north for a while. We’re still learning a lot about charting our course, sailing, anchoring and, of course, just living in close quarters. Each day brings something new.
Anchors Aweigh!
Since our general plan has been that we would spend a majority of nights at anchor, we still needed to confirm that all the pieces of the anchoring puzzle were in place and would fit together as expected. This involves not only the anchoring process itself, but also a reliable source of electricity and water.
Although David had purchased the new Delta 35 anchor and 130 feet of chain rode back in March, we hadn’t attached the chain rode to the anchor, because we needed to first mark the rode in standard lengths to allow us to know how much had been deployed. After researching a number of alternatives, we finally went with the recommendation to paint the chain lengths with Rustoleum, using a technique of painting 1 chain link per ten feet deployed (e.g. at 10’, 1 link, at 20’, 2 links, etc.). Since the paint required 24 hours to dry, we once again took advantage of Don’s hospitality and spread the chain out in his back yard to paint and let dry. (We didn’t think the marina would want this all over their transient dock for a couple of days.) All chain rodes also require something called a “snubber”, which keeps the boat from jerking on the inelastic chain. A snubber is nothing more than a piece of nylon rope with a thimble and chain hook in one end, which is hooked through a link of the chain and then cleated. David made 2 of these to ensure we had a spare.
With the anchor taken care of, the next piece was ensuring we could recharge our batteries when anchored several days. We needed to test the generator and the newly installed 55amp Iota Battery charger. This would have been simple enough, except we couldn’t find a waterproof box to house the generator on deck. (Since, once we put gas in it, we no longer could keep it down below.) After looking high and low, we stumbled across a deck box at an Annapolis consignment store, Bacon and Associates. Amazingly, it was exactly the right size for the generator and 2 small cans of gas. With the box safely lashed to the deck, we fired up the generator, connected it to the battery charger, and both worked exactly as expected. A first! The new battery monitor also nicely confirmed the charger was delivering the output expected.
The last thing we had to confirm was that we could drink water from our freshly scrubbed tanks. Since it didn’t make sense to continue buying bottled water, but since we were both waiting for the other to be the first to drink, we were gradually getting dehydrated in this game of chicken. Finally, push came to shove. Since Cathy is always pushing the limits on foods (e.g. eating things past expiration dates, etc.), she drank the first glass. David watched carefully for 24 hours. When she didn’t seem to be too ill, he finally drank a glass too. We haven’t turned green or anything, and we’ve been drinking it for several weeks now. Phew! (We do continue to filter all water going into the tank, we add chlorine to the tank and, our last defense, we have a PUR water filter on the galley sink.)
Up the mast . . . again
As you may recall, the last trip up the mast was particularly unsuccessful in resolving our anemometer (wind speed) problem. After exchanging some e-mails with Raymarine, it became apparent that we had to return the masthead unit to them for servicing. So, Cathy took another trip up the mast. (She’s getting much better at it. David says he’ll go next time.) Raymarine repaired the part, but couldn’t get it back to us before we had to leave Solomons. It has since arrived at our daughter’s house, so David should be able to mount it again once we connect with Bonnie and Troy for a fishing trip the last weekend in June.
Rope tricks
We had purchased 200 feet of braided line for one of our many anchors, the Danforth S1600. However, it needed a thimble inserted in the end to attach to the anchor shackle. David had been putting his Boy Scout skills to work splicing a number of three-stand nylon ropes, but he had never spliced braided line. Margaret, our neighbor in Solomons, graciously taught us both how to do this and lent her tools (called fids) that are necessary for this type of splice. We successfully put an eye splice in not only the anchor line, but also a new spare halyard we plan to run to the top of the mast. (Something else David will be carrying up there on his first trip. Right?) Also, David shared his 3-strand splicing techniques with Margaret, which she had never done before.
Shopping trips
It seems there is no end to the number of “little” things that are needed before you set sail. We made more trips to local Boaters World, West Marine, Lowes, and Wal-mart to keep buying (and returning) items for the various projects we’ve been trying to finish. We also made a very productive trip to Bacon and Associates, a consignment store in Annapolis. We managed to pick up 2 folding bikes, the deck box, and a number of smaller items for less than $200. David also received an early Father’s Day present, when Bonnie and her fiancé, Troy, took him shopping for a fishing rod and reel and related supplies. (That’s why we’re meeting them to go fishing, so Troy can teach us how to use it.) On the recommendation of other sailors, we decided to buy another anchor. This was a small 14 lb. Danforth S12, which is now our stern anchor. This will be used as a “brake” for emergencies or to kedge off (i.e., pull ourselves off when we run aground).
Sail Trim 101
We had a few more opportunities to go out sailing with Don, who showed us a number of things we hadn’t been doing which would get more speed out of the sails, especially in lighter winds, which are common on the Chesapeake in summer. This came in handy on our 2 long days of sailing across the bay to the Eastern shore and back in light winds after we left Solomons.
Goodbyes
It’s hard to believe that just a month spent at the marina could generate attachments that made the departure harder to do. Our neighbors, Chris and Margaret, had become friends that we had shared experiences and laughs with. As we mentioned above, Margaret and David exchanged splicing techniques and we helped with dog sitting on one day in exchange for a ride to return our rental car the next day. Also, we watched them return from a harrowing weekend trip to Dunn's Cove on the Choptank, which became instead a very long day trip, when their anchor started dragging as they were on the shore, not on the boat. After they rushed back and caught the boat (which had drifted enough that another boat had to move to avoid it), they were unable to haul their anchor back on board, so they had to cut the rode and leave it at the bottom of Dun Cove. Unfortunately, without another anchor, they had to have a slip for the night, which meant another 10 miles up the Choptank or back to the safety of their own slip in Hospitality Harbor. Home seemed the better choice. As they came back in the Patuxent after dark (first time night sailing for both), they realized that the Solomon’s channel markers are not lit. With a flashlight and their GPS hooked to charts on the PC, they navigated back in, exhausted, after 10pm. We helped them with their dock lines and listened to the story of their day. As the winds howled the next day, they decided it was fate that they came back early, but they spent quite a while talking to David about anchors (one of his favorite subjects) and researching alternatives. We suggested this would be a great Voice of Experience episode for Sail Magazine. (We hope we didn’t spoil it for them by including it here.) It was this experience that caused David to make sure we had bolt cutters (in case we had to sever our anchor chain) and a trip line (float attached to a line on the anchor) so we could be sure of the position of our anchor once it was set.
Where to?
All of our focus had been concentrated on boat mechanics at the expense of any trip planning. When we finally turned our attention to this, we had to make a basic decision. North or South? We finally decided to go south so we could meet up with Bonnie and Troy. Our first stop was across the bay to Crisfield, MD on the Eastern Shore. Crisfield is about as far south as you can go and stay in MD. The marina there, Somers Cove, was recommended by the guide book we were reading, and they had a buy 2 nights, get one free offer that we took them up on. This proved a good choice, since it poured the first day and the winds were gusting above 25 knots the 2nd day. We took the opportunity to tour Crisfield one day (we had a personalized trolley tour) and visit Smith Island the next (by mail boat). It was a great first stop. The towns folk were very friendly and the marina was very nice. Smith Island was beautiful. After seeing the village, we sampled some 9-layer Smith Island cake and a delicious crabcake at Ruke’s, from their porch overlooking the harbor. Friday took us back to the Western shore and anchoring in Mill Creek. (We finally put all that preparation to good use.)
We’ll continue to work our way south for another week, and then probably head back north for a while. We’re still learning a lot about charting our course, sailing, anchoring and, of course, just living in close quarters. Each day brings something new.
- Published on
Traveling the Chesapeake Bay without a home port allows us to improve our seamanship and get used to life aboard the boat before heading south. The Bay's soft bottoms are forgiving when you go aground and we still have connections in the area which make it a little easier to make the transition to cruising.